|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
|
import FWCore.ParameterSet.Config as cms
# ------------------------------------------------------------------------------
# configure a filter to run only on the events selected by SiStripCalCosmics AlcaReco
from HLTrigger.HLTfilters.hltHighLevel_cfi import *
ALCARECOCalCosmicsFilterForSiStripLorentzAngle = hltHighLevel.clone(
HLTPaths = ['pathALCARECOSiStripCalCosmics'],
throw = True, ## dont throw on unknown path names
TriggerResultsTag = ("TriggerResults","","RECO")
)
# ------------------------------------------------------------------------------
# This is the sequence for track refitting of the track saved by SiStripCalCosmics
# to have access to transient objects produced during RECO step and not saved
from Alignment.CommonAlignmentProducer.AlignmentTrackSelector_cfi import *
ALCARECOSiStripLACalibrationTracks = AlignmentTrackSelector.clone(
src = 'ALCARECOSiStripCalCosmics',
filter = True,
applyBasicCuts = True,
ptMin = 3.
)
# FIXME: the beam-spot should be kept in the AlCaReco (if not already there) and dropped from here
from RecoVertex.BeamSpotProducer.BeamSpot_cff import *
from RecoTracker.IterativeTracking.InitialStep_cff import *
from RecoTracker.Configuration.RecoTrackerP5_cff import *
from RecoTracker.TrackProducer.TrackRefitter_cfi import *
from TrackingTools.TransientTrack.TransientTrackBuilder_cfi import *
ALCARECOSiStripLACalibrationTracksRefit = TrackRefitter.clone(src = "ALCARECOSiStripLACalibrationTracks",
TrajectoryInEvent = True,
NavigationSchool = "")
# refit and BS can be dropped if done together with RECO.
# track filter can be moved in acalreco if no otehr users
ALCARECOSiStripLATrackFilterRefit = cms.Sequence(ALCARECOSiStripLACalibrationTracks +
offlineBeamSpot +
ALCARECOSiStripLACalibrationTracksRefit)
# ------------------------------------------------------------------------------
# This is the module actually doing the calibration
from CalibTracker.SiStripLorentzAngle.SiStripLorentzAnglePCLMonitor_cfi import SiStripLorentzAnglePCLMonitor
ALCARECOSiStripLACalib = SiStripLorentzAnglePCLMonitor.clone(
folder = 'AlCaReco/SiStripLorentzAngle',
Tracks = 'ALCARECOSiStripLACalibrationTracksRefit'
)
# ----------------------------------------------------------------------------
# ****************************************************************************
# ** Conversion for the SiStripLorentzAngle DQM dir **
# ****************************************************************************
MEtoEDMConvertSiStripLorentzAngle = cms.EDProducer("MEtoEDMConverter",
Name = cms.untracked.string('MEtoEDMConverter'),
Verbosity = cms.untracked.int32(0), # 0 provides no output
# 1 provides basic output
# 2 provide more detailed output
Frequency = cms.untracked.int32(50),
MEPathToSave = cms.untracked.string('AlCaReco/SiStripLorentzAngle'))
# The actual sequence
seqALCARECOPromptCalibProdSiStripLorentzAngle = cms.Sequence(
ALCARECOCalCosmicsFilterForSiStripLorentzAngle *
ALCARECOSiStripLATrackFilterRefit *
ALCARECOSiStripLACalib *
MEtoEDMConvertSiStripLorentzAngle
)
|