|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
|
# Configuration file to run CSCLayerGeometryInside
#
# Tim Cox 06.05.2009
import FWCore.ParameterSet.Config as cms
process = cms.Process("CSCGeometryTest")
# Endcap Muon geometry
# ====================
process.load("Geometry.MuonNumbering.muonNumberingInitialization_cfi")
process.load("Geometry.MuonCommonData.muonEndcapIdealGeometryXML_cfi")
# Fake alignment is/should be ideal geometry
# ==========================================
process.load("Alignment.CommonAlignmentProducer.FakeAlignmentSource_cfi")
process.fake2 = process.FakeAlignmentSource
del process.FakeAlignmentSource
process.preferFakeAlign = cms.ESPrefer("FakeAlignmentSource", "fake2")
# flags for modelling of CSC layer & strip geometry
# =================================================
process.load("Geometry.CSCGeometry.cscGeometry_cfi")
process.source = cms.Source("EmptySource")
process.maxEvents = cms.untracked.PSet(
input = cms.untracked.int32(1)
)
# root output file
# ================
process.TFileService = cms.Service("TFileService",
fileName = cms.string("clgi.root"),
closeFileFast = cms.untracked.bool(True)
)
# Configure the actual EDAnalyzer
# ===============================
process.analyze = cms.EDAnalyzer(
"CSCLayerGeometryInside",
ntries = cms.untracked.int32(200000),
nbx = cms.untracked.int32(400),
nby = cms.untracked.int32(800),
xlo = cms.untracked.double(-50.),
xhi = cms.untracked.double(50.),
ylo = cms.untracked.double(-100.),
yhi = cms.untracked.double(100.)
)
# Message Logger - default is all my debug messages off
# ==============
# Note that this has no effect on errors from DDD - they come even if this is removed!
process.load("FWCore.MessageLogger.MessageLogger_cfi")
process.MessageLogger.debugModules.append('CSCGeometryESModule')
process.MessageLogger.cout = cms.untracked.PSet(
threshold = cms.untracked.string('DEBUG'),
default = cms.untracked.PSet( limit = cms.untracked.int32(0) ),
CSCGeometry = cms.untracked.PSet( limit = cms.untracked.int32(0) ),
CSCGeometryBuilder = cms.untracked.PSet( limit = cms.untracked.int32(0) )
)
process.p1 = cms.Path(process.analyze)
|