<?xml version="1.0"?>
<DDDefinition xmlns="http://www.cern.ch/cms/DDL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.cern.ch/cms/DDL ../../../DetectorDescription/Schema/DDLSchema.xsd">
  <ConstantsSection label="ebalgo.xml" eval="true">
    <Constant name="NSpmPerHalf" value="18"/>
    <Constant name="fm"          value="1e-12*m"/>
    <Constant name="mum"         value="1.e-3*mm"/>
  </ConstantsSection>
  <Algorithm name="ecal:DDEcalBarrelNewAlgo">
    <rParent name="eregalgo:ECAL"/>
    <!-- Translations indicated by 3 vectors x, y, z
	 Rotations    indicated by an axis 3 vector x,y,z followed by an angle
    -->
    <!--    <String  name="BarParFil" value="[ebcon:BarParFil]"/>
	 <String  name="BarParVol" value="[ebcon:BarParVol]"/>
    -->
    <!-- Barrel container volume assumed to be polycone, partial in phi for
	 test beam work
    -->
    <String name="BarName" value="EBAR"/>
    <String name="BarMat" value="materials:Air"/>
    <Vector name="BarZPts" type="numeric" nEntries="4">
      [ebcon:BarZPts01], [ebcon:BarZPts02], [ebcon:BarZPts03], [ebcon:BarZPts04]
    </Vector>
    <Vector name="BarRMin" type="numeric" nEntries="4">
      [ebcon:BarRMin01], [ebcon:BarRMin02], [ebcon:BarRMin03], [ebcon:BarRMin04]
    </Vector>
    <Vector name="BarRMax" type="numeric" nEntries="4">
      [ebcon:BarRMax01], [ebcon:BarRMax02], [ebcon:BarRMax03], [ebcon:BarRMax04]
    </Vector>
    <Vector name="BarTran" type="numeric" nEntries="3">
      [ebcon:BarTranX], [ebcon:BarTranY], [ebcon:BarTranZ]
    </Vector>
    <Vector name="BarRota" type="numeric" nEntries="4">
      [ebrot:BarRotX], [ebrot:BarRotY], [ebrot:BarRotZ], [ebrot:BarRotA]
    </Vector>
    <Vector name="BarRota2" type="numeric" nEntries="4">
      [ebrot:BarRot2X], [ebrot:BarRot2Y], [ebrot:BarRot2Z], [ebrot:BarRot2A]
    </Vector>
    <Vector name="BarRota3" type="numeric" nEntries="4">
      [ebrot:BarRot3X], [ebrot:BarRot3Y], [ebrot:BarRot3Z], [ebrot:BarRot3A]
    </Vector>
    <Numeric name="BarPhiLo" value="[ebcon:BarPhiLo]"/>
    <Numeric name="BarPhiHi" value="[ebcon:BarPhiHi]"/>
    <Numeric name="BarHere" value="1"/>
    <!-- The base rotations and translations refer to those
	 applied to the base supermodule prior to its replication
    -->
    <!-- Supermodule volume: polycone with adjustments via Boolean volumes
    -->
    <String name="SpmName" value="ebalgo:ESPM"/>
    <String name="SpmMat" value="materials:E_Air"/>
    <Numeric name="SpmNPerHalf" value="[NSpmPerHalf]"/>
    <Numeric name="SpmLowPhi" value="-10.5*deg"/>
    <Numeric name="SpmDelPhi" value=" 21.5*deg"/>
    <Numeric name="SpmPhiOff" value="-0.110*mrad"/>
    <Vector name="SpmZPts" type="numeric" nEntries="3">
      0*mm, 2686.7*mm, 3044*mm
    </Vector>
    <Vector name="SpmRMin" type="numeric" nEntries="3">
      1224*mm, 1224*mm, 1439*mm
    </Vector>
    <Vector name="SpmRMax" type="numeric" nEntries="3">
      1759*mm, 1759*mm, 1759*mm
    </Vector>
    <!-- the translation PRECEDES the ROTATION
    -->
    <Vector name="SpmBTran" type="numeric" nEntries="3">
      15.58*mm, 0*mm, 0*mm
    </Vector>
    <Vector name="SpmBRota" type="numeric" nEntries="4">
      0,0,1, 0*deg
    </Vector>
    <!--  These are individual translations & rotations
	 in addition to the initial placement above.
	 Order: 1st on +z hemisphere at phi=0 then to -z phi=0
    -->
    <!-- the translation PRECEDES the ROTATION
    -->
    <Vector name="SpmTran" type="numeric" nEntries="2*3*[ebalgo:NSpmPerHalf]">
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
      0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm
    </Vector>
    <Vector name="SpmRota" type="numeric" nEntries="2*4*[ebalgo:NSpmPerHalf]">
      0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,   
      0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,   
      0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,   
      
      0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,   
      0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,   
      0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg
    </Vector>
    <!-- Zero means missing, else present
	 Order: 1st on +z hemisphere at phi=0 then to -z phi=0
    -->
    <Vector name="SpmHere" type="numeric" nEntries="2*[ebalgo:NSpmPerHalf]">
      [ebcon:SpmHere01], [ebcon:SpmHere02], [ebcon:SpmHere03],
      [ebcon:SpmHere04], [ebcon:SpmHere05], [ebcon:SpmHere06],
      [ebcon:SpmHere07], [ebcon:SpmHere08], [ebcon:SpmHere09],
      [ebcon:SpmHere10], [ebcon:SpmHere11], [ebcon:SpmHere12],
      [ebcon:SpmHere13], [ebcon:SpmHere14], [ebcon:SpmHere15],
      [ebcon:SpmHere16], [ebcon:SpmHere17], [ebcon:SpmHere18],
      
      [ebcon:SpmHere19], [ebcon:SpmHere20], [ebcon:SpmHere21],
      [ebcon:SpmHere22], [ebcon:SpmHere23], [ebcon:SpmHere24],
      [ebcon:SpmHere25], [ebcon:SpmHere26], [ebcon:SpmHere27],
      [ebcon:SpmHere28], [ebcon:SpmHere29], [ebcon:SpmHere30],
      [ebcon:SpmHere31], [ebcon:SpmHere32], [ebcon:SpmHere33],
      [ebcon:SpmHere34], [ebcon:SpmHere35], [ebcon:SpmHere36]
    </Vector>
    <!-- These are for cut BOXes which trim off the sides/corners of
	 supermodule polycone. Length & height are set by supermodule polycone
	 dimensions. Transforms are prior to above supermodule transforms.
	 The "show" displays the boxes rather than subtracting them
	 (for viewing only).
	 The initial box will be placed centered on the supermodule
	 and rotated to either edge for further fine tuning via
	 the adjustments below.
	 RM, TM are for "Minus" phi, RP, TP for plus phi.
	 Translations below come after rotations in this case.
    -->
    <String name="SpmCutName" value="ECUTSPM"/>
    <Numeric name="SpmCutThick" value="40*mm"/>
    <Numeric name="SpmCutShow" value="0"/>
    <Vector name="SpmCutTM" type="numeric" nEntries="3">
      0*mm,  1*mm, 0*mm
    </Vector>
    <Vector name="SpmCutTP" type="numeric" nEntries="3">
      0*mm,  7*mm, 0*mm
    </Vector>
    <Numeric name="SpmCutRM" value="3.2*deg"/>
    <Numeric name="SpmCutRP" value="1.8*deg"/>
    <Numeric name="SpmExpThick" value="40*mm"/>
    <Numeric name="SpmExpWide" value="600*mm"/>
    <Numeric name="SpmExpYOff" value="15*mm"/>
    <String name="SpmSideName" value="ESPL"/>
    <String name="SpmSideMat" value="materials:Aluminium"/>
    <Numeric name="SpmSideHigh" value="38*cm"/>
    <Numeric name="SpmSideThick" value="1*mm"/>
    <Numeric name="SpmSideYOffM" value="-4*mm"/>
    <Numeric name="SpmSideYOffP" value="-2.5*mm"/>
    <!--  Now start specificiation of "Inner Layer" materials which
	 are those volumes which are tubes and which start
	 at the supermodule inner radius. We provide
	 the overall name of the parent volume (layers will
	 be indexed 1, 2, 3, ...), thicknesses, and materials.
    -->
    <Numeric name="IlyHere" value="1"/>
    <String name="IlyName" value="EILY"/>
    <Numeric name="IlyPhiLow" value="-9.9*deg"/>
    <Numeric name="IlyDelPhi" value="19.7*deg"/>
    <Vector name="IlyThick" type="numeric" nEntries="7">
      0.2*mm, 3*mm, 0.2*mm, 0.2*mm, 25*mm, 4*mm, 12*mm
    </Vector>
    <Vector name="IlyMat" type="string" nEntries="7">
      materials:E_Epoxy,
      materials:E_Rohacell,
      materials:E_Epoxy,
      materials:E_Aluminium,
      materials:E_PolyGrains,
      materials:E_Aluminium ,
      materials:E_Air
    </Vector>
    <Numeric name="IlyPipeHere" value="1"/>
    <String name="IlyPipeName" value="EIPIP"/>
    <String name="IlyPipeMat" value="materials:E_Aluminium"/>
    <Numeric name="IlyPipeOD" value="8*mm"/>
    <Numeric name="IlyPipeID" value="6*mm"/>
    <Vector name="IlyPipeLength" type="numeric" nEntries="10">
      2573*mm,
      520*mm,
      351*mm, 
      400*mm, 
      1985*mm,
      735*mm, 
      675*mm,
      595*mm, 
      1438*mm,
      42.7*mm
    </Vector>
    <Vector name="IlyPipeType" type="numeric" nEntries="96">
      0,
      1,1,1,1,1,1,1,1,
      2,2,2,2,2,2,2,2,2,
      3,3,3,3,3,3,3,3,
      4,
      5,5,
      6,6,6,
      7,
      8,
      9,9,9,9,9,9,9,9,9,9,
      9,9,9,9,9,9,9,9,9,9,
      9,9,9,9,9,9,9,9,9,9,9,
      9,9,9,9,9,9,9,9,9,
      9,9,9,9,9,9,9,9,
      9,9,9,9,9,9,9,9,
      9,9,9,9,9,9
    </Vector>
    <Vector name="IlyPipePhi" type="numeric" nEntries="96">
      -9*deg, 
      -5*deg, -3*deg, -1*deg, +1*deg, +3*deg, +5*deg,
      -1*deg, +1*deg,
      -7*deg, -5*deg, -3*deg, -1*deg, +1*deg, +3*deg, +5*deg, +7*deg, +9*deg,
      -7*deg, -5*deg, -3*deg, -1*deg, +1*deg, +3*deg, +5*deg, +7*deg,
      +9*deg, 
      +7*deg,
      -5*deg, 
      -3*deg,                 +3*deg, +5*deg,
      +7*deg,
      -7*deg,
      -6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
      -6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
      -6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg,
      -8*deg,         -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
      -8*deg, -6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
      -6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
      -6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
      -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg
    </Vector>
    <Vector name="IlyPipeZ" type="numeric" nEntries="96">
      31*mm, 
      1161*mm, 1161*mm, 1161*mm, 1161*mm, 1161*mm, 1161*mm, 1861*mm, 1861*mm, 
      148*mm,  148*mm,  148*mm,  148*mm,  148*mm,  148*mm,  148*mm,  148*mm,  148*mm,
      616*mm,  616*mm,  616*mm,  616*mm,  616*mm,  616*mm,  616*mm,  616*mm,
      616*mm, 
      1861*mm, 1778*mm,
      1861*mm, 1861*mm, 1861*mm,
      1161*mm,
      1161*mm,
      505*mm,  142*mm,  505*mm,  142*mm,  505*mm,  142*mm,  505*mm,  142*mm,
      1027*mm,  610*mm, 1027*mm,  610*mm, 1027*mm,  610*mm, 1027*mm,  610*mm,
      1155*mm, 1687*mm, 1155*mm, 1687*mm, 1155*mm, 1687*mm, 1155*mm,
      2609*mm, 2554*mm, 1855*mm, 2400*mm, 1855*mm, 2554*mm, 1855*mm, 2606*mm,
      25*mm,   25*mm,   25*mm,   25*mm,   25*mm,   25*mm,   25*mm,   25*mm,   25*mm,
      51*mm,   51*mm,   51*mm,   51*mm,   51*mm,   51*mm,   51*mm,   51*mm,
      571*mm,  571*mm,  571*mm,  571*mm,  571*mm,  571*mm,  571*mm,  571*mm,
      1773*mm, 1773*mm, 1773*mm, 1773*mm, 1773*mm, 1773*mm
    </Vector>
    <Numeric name="IlyPTMHere" value="1"/>
    <String name="IlyPTMName" value="EIPTM"/>
    <String name="IlyPTMMat" value="materials:E_Aluminium"/>
    <Numeric name="IlyPTMWidth" value="16*mm"/>
    <Numeric name="IlyPTMLength" value="10*mm"/>
    <Numeric name="IlyPTMHeight" value=" 6*mm"/>
    <Vector name="IlyPTMZ" type="numeric" nEntries="4">
      282*mm, 851*mm, 1428*mm, 2204*mm
    </Vector>
    <Vector name="IlyPTMPhi" type="numeric" nEntries="4">
      +0.963*deg - 0.6*deg, -1.037*deg - 0.6*deg, +9.5*deg - 1.2*deg, -7.037*deg - 0.6*deg
    </Vector>
    <Numeric name="IlyFanOutHere" value="1"/>
    <String name="IlyFanOutName" value="EIFO"/>
    <String name="IlyFanOutMat" value="materials:E_Aluminium"/>
    <Numeric name="IlyFanOutWidth" value=" 15*mm"/>
    <Numeric name="IlyFanOutLength" value="100*mm"/>
    <Numeric name="IlyFanOutHeight" value="  8*mm"/>
    <String name="IlyDiffName" value="EIDI"/>
    <String name="IlyDiffMat" value="materials:Teflon"/>
    <Numeric name="IlyDiffLength" value=" 25*mm"/>
    <Numeric name="IlyDiffOff" value=" 25*mm"/>
    <String name="IlyBndlName" value="EIFB"/>
    <String name="IlyBndlMat" value="materials:Glass"/>
    <Numeric name="IlyBndlLength" value=" 45*mm"/>
    <Numeric name="IlyBndlOff" value=" 55*mm"/>
    <Vector name="IlyFanOutZ" type="numeric" nEntries="11">
      2520*mm, 2520*mm, 2350*mm, 2350*mm, 1610*mm,
      1610*mm,  960*mm,  960*mm,  430*mm,  430*mm,  430*mm
    </Vector>
    <Vector name="IlyFanOutPhi" type="numeric" nEntries="11">
      0.0*deg, +2.0*deg, -4.0*deg, +6.0*deg, -4.0*deg,
      +6.0*deg, -4.0*deg, +6.0*deg, -4.0*deg, +6.0*deg,  2.0*deg
    </Vector>
    <String name="IlyFEMName" value="EIFEM"/>
    <String name="IlyFEMMat" value="materials:E_Aluminium"/>
    <Numeric name="IlyFEMWidth" value=" 10*mm"/>
    <Numeric name="IlyFEMLength" value=" 45*mm"/>
    <Numeric name="IlyFEMHeight" value="  5*mm"/>
    <Vector name="IlyFEMZ" type="numeric" nEntries="5">
      1930*mm, 1220*mm,  700*mm,  200*mm,  200*mm
    </Vector>
    <Vector name="IlyFEMPhi" type="numeric" nEntries="5">
      -4.0*deg, -4.0*deg, -4.0*deg, -4.0*deg, +2.0*deg
    </Vector>
    <!-- Barrel ECAL nominal crystal sizes from Table 3.2 ECAL TDR, page 54 
	 
	 The correspondence between GEANT/DDD dimension names & these specs
	 is the following: bl1=AF/2, tl1=CF/2, h1=BF/2, bl2=AR/2, tl2=CR/2, h2=BR/2
	 
	 underXX means the "as built" difference:  nominal - built
	 
    -->
    <Numeric name="UnderLZ" value="00*[mum]"/>
    <!-- these are actual measured underages, avgd for each type. wait to implement
    -->
    <Numeric name="UnderAF" value="53*[mum]"/>
    <Numeric name="UnderBF" value="44*[mum]"/>
    <Numeric name="UnderCF" value="56*[mum]"/>
    <Numeric name="UnderAR" value="51*[mum]"/>
    <Numeric name="UnderBR" value="36*[mum]"/>
    <Numeric name="UnderCR" value="55*[mum]"/>
    <Numeric name="NomCryDimLZ" value="230.0*mm"/>
    <Numeric name="NomCryDimAF" value="21.8308*mm"/>
    <Numeric name="NCryTypes" value="17"/>
    <Vector name="NomCryDimBF" type="numeric" nEntries="17">
      23.5919*mm, 22.2198*mm, 22.3422*mm, 22.4638*mm, 22.6054*mm,
      22.6010*mm, 22.5454*mm, 22.6720*mm, 22.8219*mm,
      23.0780*mm, 23.1419*mm, 23.2896*mm, 23.4664*mm,
      23.7063*mm, 23.8736*mm, 24.0620*mm, 24.2853*mm
    </Vector>
    <Vector name="NomCryDimCF" type="numeric" nEntries="17">
      21.8443*mm, 21.8736*mm, 21.9070*mm, 21.9394*mm, 21.9707*mm,
      21.9991*mm, 22.0248*mm, 22.0500*mm, 22.0734*mm,
      22.0961*mm, 22.1147*mm, 22.1324*mm, 22.1489*mm,
      22.1645*mm, 22.1778*mm, 22.1901*mm, 22.2018*mm
    </Vector>
    <Vector name="NomCryDimAR" type="numeric" nEntries="17">
      25.8422*mm, 25.8131*mm, 25.7546*mm, 25.6696*mm, 25.5615*mm,
      25.4347*mm, 25.2937*mm, 25.1417*mm, 24.9823*mm,
      24.8179*mm, 24.6528*mm, 24.4891*mm, 24.3287*mm,
      24.1727*mm, 24.0228*mm, 23.8798*mm, 23.7443*mm
    </Vector>
    <Vector name="NomCryDimBR" type="numeric" nEntries="17">
      25.4840*mm, 26.2229*mm, 26.2829*mm, 26.3143*mm, 26.3410*mm,
      26.1820*mm, 25.9533*mm, 25.9203*mm, 25.9025*mm,
      26.0011*mm, 25.8831*mm, 25.8575*mm, 25.8644*mm,
      25.9463*mm, 25.9551*mm, 25.9914*mm, 26.0706*mm
    </Vector>
    <Vector name="NomCryDimCR" type="numeric" nEntries="17">
      25.8568*mm, 25.8637*mm, 25.8442*mm, 25.7969*mm, 25.7245*mm,
      25.6297*mm, 25.5172*mm, 25.3924*mm, 25.2576*mm,
      25.1169*mm, 24.9704*mm, 24.8240*mm, 24.6792*mm,
      24.5380*mm, 24.4001*mm, 24.2680*mm, 24.1427*mm
    </Vector>
    <Numeric name="WallThAlv" value="  70*[mum]"/>
    <Numeric name="WrapThAlv" value="  30*[mum]"/>
    <Numeric name="ClrThAlv" value=" 120*[mum]"/>
    <Numeric name="WallFrAlv" value=" 100*[mum]"/>
    <Numeric name="WrapFrAlv" value="  30*[mum]"/>
    <Numeric name="ClrFrAlv" value="   3*mm"/>
    <Numeric name="WallReAlv" value="   0*[mum]"/>
    <Numeric name="WrapReAlv" value="   0*[mum]"/>
    <Numeric name="ClrReAlv" value="   5*mm"/>
    <!-- These are gaps between Alveoli in the Eta direction
	 as measured perpendicular to the nearest crystal axis.
	 Namely, this is NOT the gap along z, which is this
	 gap/cosTheta. The first is before the 1st, then after the 1st,
	 etc. These are in addition to the clearances around Webs.
    -->
    <Vector name="GapAlvEta" type="numeric" nEntries="18">
      430*[mum],  30*[mum],  10*[mum],  10*[mum],  10*[mum], 255*[mum],
      10*[mum],  10*[mum],  10*[mum],  915*[mum],
      25*[mum],  10*[mum],  10*[mum], 1330*[mum],
      10*[mum],  90*[mum],  10*[mum], 100*[mum]
    </Vector>
    <Numeric name="NCryPerAlvEta" value="5"/>
    <String name="CryName" value="EBRY"/>
    <String name="ClrName" value="ECLR"/>
    <String name="WrapName" value="EWRA"/>
    <String name="WallName" value="EWAL"/>
    <String name="CryMat" value="materials:E_PbWO4"/>
    <String name="ClrMat" value="materials:Air"/>
    <String name="WrapMat" value="materials:E_Aluminium"/>
    <String name="WallMat" value="materials:E_Epoxy"/>
    <!-- APD assembly has capsule, ceramic, bulk silicon, epoxy, sensitive silicon-->
    <String name="CapName" value="ECAP"/>
    <Numeric name="CapHere" value="1"/>
    <String name="CapMat" value="materials:Peek"/>
    <Numeric name="CapXSize" value="  23*mm"/>
    <Numeric name="CapYSize" value="  20*mm"/>
    <Numeric name="CapThick" value="   4*mm"/>
    <String name="SGLName" value="ESGL"/>
    <String name="SGLMat" value="materials:Silicone_Gel"/>
    <Numeric name="SGLThick" value=" 0.030*mm"/>
    <String name="CerName" value="ECER"/>
    <String name="CerMat" value="materials:Borosilicate_Glass"/>
    <Numeric name="CerXSize" value=" 9.1*mm"/>
    <Numeric name="CerYSize" value="10.5*mm"/>
    <Numeric name="CerThick" value=" 1.55*mm + 0.575*mm - 0.350*mm"/>
    <String name="AGLName" value="EAGL"/>
    <String name="AGLMat" value="materials:E_Epoxy"/>
    <Numeric name="AGLThick" value=" 0.575*mm"/>
    <String name="BSiName" value="EBSI"/>
    <String name="BSiMat" value="materials:E_Silicon"/>
    <Numeric name="BSiXSize" value=" 7.5*mm"/>
    <Numeric name="BSiYSize" value=" 7.5*mm"/>
    <Numeric name="BSiThick" value=" 0.400*mm + 0.575*mm"/>
    <String name="APDName" value="EAPD"/>
    <String name="APDMat" value="materials:E_Silicon"/>
    <Numeric name="APDSide" value="   5*mm"/>
    <Numeric name="APDThick" value=" 0.005*mm"/>
    <Numeric name="APDZ" value="12.5*mm"/>
    <Numeric name="APDX1" value=" 7.2*mm"/>
    <Numeric name="APDX2" value="16.8*mm"/>
    <String name="ATJName" value="EATJ"/>
    <String name="ATJMat" value="materials:E_Silicon"/>
    <Numeric name="ATJThick" value=" 0.0449*mm"/>
    <String name="ANDName" value="EAND"/>
    <String name="ANDMat" value="materials:E_Silicon"/>
    <Numeric name="ANDThick" value=" 0.0001*mm"/>
    <!-- Conical web specifications: known to be placed at 5 locations,
	 before the 1st crystal at 90deg, & thence after 25, 45, 65, & 85
	 crystals. Clearance volume holds plate inside it.
    -->
    <Numeric name="WebHere" value="1"/>
    <String name="WebPlName" value="EWEBPL"/>
    <String name="WebClrName" value="EWEB"/>
    <String name="WebPlMat" value="materials:E_Aluminium"/>
    <String name="WebClrMat" value="materials:Air"/>
    <Vector name="WebPlTh" type="numeric" nEntries="5">
      2*mm, 4*mm, 4*mm, 4*mm, 2*mm
    </Vector>
    <Vector name="WebClrTh" type="numeric" nEntries="5">
      0.7*mm, 2*mm, 2*mm, 2*mm, 2*mm
    </Vector>
    <Vector name="WebLength" type="numeric" nEntries="5">
      259*mm, 250*mm, 264*mm, 287*mm, 365*mm
    </Vector>
    <!-- The crystals & web pieces get stacked inside the Half Alveolar
	 Wedge whose dimensions are mostly taken from the first crystal.
	 This is the Right-handed version which gets reflected
	 for a left handed version in the code. Both get placed
	 inside a Full Alveolar Wedge, back to back.
    -->
    <String name="HawRName" value="EHAWR"/>
    <String name="FawName" value="EFAW"/>
    <Numeric name="FawHere" value="1"/>
    <Numeric name="HawRHBIG" value="295*mm"/>
    <Numeric name="HawRhsml" value="185*mm"/>
    <Numeric name="HawRCutY" value="20*cm"/>
    <Numeric name="HawRCutZ" value="374*mm"/>
    <Numeric name="HawRCutDelY" value="5*mm"/>
    <Numeric name="HawYOffCry" value="6*mm"/>
    <Numeric name="NFawPerSupm" value="10"/>
    <Numeric name="FawPhiOff" value="-9.757*deg"/>
    <Numeric name="FawDelPhi" value="2.0015*deg"/>
    <Numeric name="FawPhiRot" value="2.7*deg"/>
    <Numeric name="FawRadOff" value="1270*mm"/>
    <Numeric name="GridHere" value="1"/>
    <String name="GridName" value="EGRID"/>
    <String name="GridMat" value="materials:Aluminium"/>
    <Numeric name="GridThick" value="32*mm"/>
    <!-- From here on is for the material behind the crystals.
	 This does not include the grid & tablet included above,
	 but does include cooling, electronics, cables, & support plates.
    -->
    <Numeric name="BackXOff" value="1566*mm"/>
    <Numeric name="BackYOff" value="  17*mm"/>
    <String name="BackSideName" value="EBSID"/>
    <Numeric name="BackSideHere" value="1"/>
    <Numeric name="BackSideLength" value="2874*mm"/>
    <Numeric name="BackSideHeight" value=" 148*mm"/>
    <Numeric name="BackSideWidth" value="  20*mm"/>
    <Numeric name="BackSideYOff1" value=" -18*mm"/>
    <Numeric name="BackSideYOff2" value="  14*mm"/>
    <Numeric name="BackSideAngle" value="82*deg"/>
    <String name="BackSideMat" value="materials:E_Aluminium"/>
    <Numeric name="BackHere" value="1"/>
    <String name="BackPlateName" value="EBPL"/>
    <Numeric name="BackPlateHere" value="1"/>
    <Numeric name="BackPlateLength" value="2873*mm"/>
    <Numeric name="BackPlateThick" value="  15*mm"/>
    <Numeric name="BackPlateWidth" value=" 590*mm"/>
    <String name="BackPlateMat" value="materials:StainlessSteel"/>
    <String name="BackPlate2Name" value="EBPL2"/>
    <Numeric name="BackPlate2Thick" value="  1*mm"/>
    <String name="BackPlate2Mat" value="materials:E_Aluminium"/>
    <!--
	<String  name="BackSpacerName"    value="ESPA"  />
	<Numeric name="BackSpacerHere"    value="1" />
	<Numeric name="BackSpacerLength"  value="2673*mm" />
	<Numeric name="BackSpacerThick"   value="  23*mm" />
	<Numeric name="BackSpacerWidth"   value="  80*mm" />
	<Numeric name="BackSpacerXOff"    value="  90*mm" />
	<String  name="BackSpacerMat"     value="materials:E_Aluminium"  />
	146*mm, 160*mm, 160*mm, 189*mm, 189*mm, 215*mm, 215*mm, 244*mm
    -->
    <String name="GrilleName" value="EGRL"/>
    <Numeric name="GrilleHere" value="1"/>
    <Numeric name="GrilleThick" value=" 20*mm"/>
    <Numeric name="GrilleWidth" value="510*mm"/>
    <Numeric name="GrilleZSpace" value="5*mm"/>
    <String name="GrilleMat" value="materials:E_Aluminium"/>
    <Vector name="GrilleHeight" type="numeric" nEntries="8">
      146*mm, 156*mm, 167*mm, 167*mm, 196*mm, 196*mm, 222*mm, 231*mm
    </Vector>
    <Vector name="GrilleZOff" type="numeric" nEntries="8">
      1*mm, 680*mm,  720*mm, 1310*mm,  1350*mm, 2040*mm,  2080*mm, 2854*mm
    </Vector>
    <String name="GrEdgeSlotName" value="EGRES"/>
    <String name="GrEdgeSlotMat" value="materials:E_Air"/>
    <Numeric name="GrEdgeSlotHere" value="1"/>
    <Numeric name="GrEdgeSlotWidth" value=" 44*mm"/>
    <Numeric name="GrEdgeSlotHeight" value=" 52*mm - 10*mm"/>
    <String name="GrMidSlotName" value="EGRMS"/>
    <String name="GrMidSlotMat" value="materials:E_Cables"/>
    <Numeric name="GrMidSlotHere" value="1"/>
    <Numeric name="GrMidSlotXOff" value=" 91*mm"/>
    <Numeric name="GrMidSlotWidth" value="114*mm"/>
    <Vector name="GrMidSlotHeight" type="numeric" nEntries="4">
      24*mm, 42*mm,  59*mm, 76*mm
    </Vector>
    <Numeric name="BackPipeHere" value="1"/>
    <String name="BackPipeName" value="EBPIPE"/>
    <Vector name="BackPipeDiam" type="numeric" nEntries="4">
      22*mm, 33.7*mm,  42.4*mm, 48.3*mm
    </Vector>
    <Vector name="BackPipeThick" type="numeric" nEntries="4">
      1*mm, 1*mm,  3.2*mm, 3.2*mm
    </Vector>
    <String name="BackPipeWaterMat" value="materials:E_Water"/>
    <String name="BackPipeMat" value="materials:StainlessSteel"/>
    <Numeric name="BackCoolHere" value="1"/>
    <Vector name="BackCoolName" type="string" nEntries="4">
      EBCOOL1, EBCOOL2, EBCOOL3, EBCOOL4
    </Vector>
    <String name="BackCoolMat" value="materials:E_Air"/>
    <Numeric name="BackCoolBarWidth" value="466*mm"/>
    <Numeric name="BackCoolBarHeight" value="91*mm"/>
    <Numeric name="BackCoolBarHere" value="1"/>
    <String name="BackCoolBarName" value="EBCBAR"/>
    <Numeric name="BackCoolBarThick" value="8*mm"/>
    <String name="BackCoolBarMat" value="materials:Aluminium"/>
    <String name="BackCoolBarSSName" value="EBCBSS"/>
    <Numeric name="BackCoolBarSSThick" value="0.86*mm"/>
    <String name="BackCoolBarSSMat" value="materials:StainlessSteel"/>
    <String name="BackCoolBarWaName" value="EBCBWA"/>
    <Numeric name="BackCoolBarWaThick" value="0.55*mm"/>
    <String name="BackCoolBarWaMat" value="materials:E_Water"/>
    <Numeric name="BackCoolVFEHere" value="1"/>
    <String name="BackCoolVFEName" value="ECVFE"/>
    <String name="BackCoolVFEMat" value="materials:E_Air"/>
    <String name="BackVFEName" value="EVFE"/>
    <String name="BackVFEMat" value="materials:E_Air"/>
    <Vector name="BackVFELyrThick" type="numeric" nEntries="5">
      1*mm, 3.25*mm, 2*mm, 1*mm, 0.1*mm
    </Vector>
    <Vector name="BackVFELyrName" type="string" nEntries="5">
      EVFE_1, EVFE_2, EVFE_3, EVFE_4, EVFE_5
    </Vector>
    <Vector name="BackVFELyrMat" type="string" nEntries="5">
      materials:E_Air,
      materials:Aluminium, 
      materials:E_G10, 
      materials:E_Silicon, 
      materials:E_Copper
    </Vector>
    <Vector name="BackCoolNSec" type="numeric" nEntries="4">
      1,2,4,3
    </Vector>
    <Vector name="BackCoolSecSep" type="numeric" nEntries="6">
      50*mm, 100*mm, 54*mm, 54*mm, 77*mm, 158*mm
    </Vector>
    <Vector name="BackCoolNPerSec" type="numeric" nEntries="10">
      15,6,6,6,3,1,3,3,3,6
    </Vector>
    <Numeric name="BackCoolTankHere" value="1"/>
    <String name="BackCoolTankName" value="EBTANK"/>
    <Numeric name="BackCoolTankWidth" value="28*mm"/>
    <Numeric name="BackCoolTankThick" value="16*mm"/>
    <String name="BackCoolTankMat" value="materials:StainlessSteel"/>
    <String name="BackCoolTankWaName" value="EBTWA"/>
    <Numeric name="BackCoolTankWaWidth" value="22*mm"/>
    <String name="BackCoolTankWaMat" value="materials:E_Water"/>
    <String name="BackBracketName" value="EBBRK"/>
    <Numeric name="BackBracketHeight" value="12*mm"/>
    <String name="BackBracketMat" value="materials:Aluminium"/>
    <Numeric name="BackMiscHere" value="1"/>
    <Vector name="BackMiscThick" type="numeric" nEntries="20">
      3*mm,  4*mm, 6*mm, 2*mm, 1*mm,
      4*mm,  8*mm, 6*mm, 2*mm, 1*mm,
      5*mm, 10*mm, 6*mm, 2*mm, 1*mm,
      6*mm, 13*mm, 6*mm, 2*mm, 1*mm
    </Vector>
    <Vector name="BackMiscName" type="string" nEntries="20">
      EMAL1, EMCA1, EMG101, EMSI1, EMCU1,
      EMAL2, EMCA2, EMG102, EMSI2, EMCU2,
      EMAL3, EMCA3, EMG103, EMSI3, EMCU3,
      EMAL4, EMCA4, EMG104, EMSI4, EMCU4
    </Vector>
    <Vector name="BackMiscMat" type="string" nEntries="20">
      materials:Aluminium, materials:E_Cables, materials:E_G10, materials:E_Silicon, materials:E_Copper,
      materials:Aluminium, materials:E_Cables, materials:E_G10, materials:E_Silicon, materials:E_Copper,
      materials:Aluminium, materials:E_Cables, materials:E_G10, materials:E_Silicon, materials:E_Copper,
      materials:Aluminium, materials:E_Cables, materials:E_G10, materials:E_Silicon, materials:E_Copper
    </Vector>
    <Numeric name="BackCBStdSep" value="36*mm"/>
    <Numeric name="PatchPanelHere" value="1"/>
    <String name="PatchPanelName" value="EPPA"/>
    <Vector name="PatchPanelThick" type="numeric" nEntries="7">
      10*mm, 80*mm, 50*mm, 10*mm, 5*mm, 50*mm, 10*mm
    </Vector>
    <Vector name="PatchPanelNames" type="string" nEntries="7">
      EPPAL, EPPCA, EPPG10, EPPSI, EPPCU, EPPWA, EPPSS
    </Vector>
    <Vector name="PatchPanelMat" type="string" nEntries="7">
      materials:Aluminium, materials:E_Cables,
      materials:E_G10, materials:E_Silicon, materials:E_Copper,
      materials:E_Water, materials:StainlessSteel
    </Vector>
    <Numeric name="DryAirTubeHere" value="1"/>
    <String name="DryAirTubeName" value="EDRY"/>
    <Numeric name="DryAirTubeInnDiam" value="5*mm"/>
    <Numeric name="DryAirTubeOutDiam" value="6*mm"/>
    <String name="DryAirTubeMat" value="materials:E_Copper"/>
    <Numeric name="MBCoolTubeHere" value="1"/>
    <String name="MBCoolTubeName" value="EMBC"/>
    <Numeric name="MBCoolTubeInnDiam" value="5*mm"/>
    <Numeric name="MBCoolTubeOutDiam" value="6*mm"/>
    <Numeric name="MBCoolTubeNum" value="9"/>
    <String name="MBCoolTubeMat" value="materials:StainlessSteel"/>
    <Numeric name="MBManifHere" value="1"/>
    <String name="MBManifName" value="EMANF"/>
    <Numeric name="MBManifInnDiam" value="13*mm"/>
    <Numeric name="MBManifOutDiam" value="15*mm"/>
    <String name="MBManifMat" value="materials:StainlessSteel"/>
    <Numeric name="MBLyrHere" value="1"/>
    <Vector name="MBLyrThick" type="numeric" nEntries="5">
      1*mm, 2.6*mm, 2*mm, 1*mm, 0.1*mm
    </Vector>
    <Vector name="MBLyrName" type="string" nEntries="5">
      EMBL1, EMBL2, EMBL3, EMBL4, EMBL5
    </Vector>
    <Vector name="MBLyrMat" type="string" nEntries="5">
      materials:E_Air,
      materials:Aluminium, 
      materials:E_G10, 
      materials:E_Silicon, 
      materials:E_Copper
    </Vector>
    <Numeric name="PincerRodHere" value="1"/>
    <String name="PincerRodName" value="EPCRROD"/>
    <String name="PincerRodMat" value="materials:E_Air"/>
    <Vector name="PincerRodAzimuth" type="numeric" nEntries="9">
      -8*deg, -6*deg, -4*deg, -2*deg, 0*deg, 2*deg, 4*deg, 6*deg, 8*deg
    </Vector>
    <String name="PincerEnvName" value="EPCRENV"/>
    <String name="PincerEnvMat" value="materials:E_Air"/>
    <Numeric name="PincerEnvWidth" value="13.6*mm"/>
    <Numeric name="PincerEnvHeight" value="9.5*mm"/>
    <Numeric name="PincerEnvLength" value="15.5*mm"/>
    <Vector name="PincerEnvZOff" type="numeric" nEntries="34">
      50.984535*mm,  98.778778*mm, 167.981033*mm, 213.184143*mm, 281.757080*mm, 327.713348*mm, 397.682068*mm,
      444.741180*mm, 516.680664*mm, 565.242798*mm, 646.232422*mm, 696.343262*mm, 772.983398*mm, 824.869385*mm,
      904.857849*mm, 959.290649*mm,1043.466309*mm,1100.898071*mm,1198.996460*mm,1260.129883*mm,1354.826782*mm,
      1419.607178*mm,1520.354248*mm,1589.457520*mm,1697.164795*mm,1771.165894*mm,1898.585449*mm,1978.222656*mm,
      2102.583740*mm,2188.188721*mm,2322.048828*mm,2414.281982*mm,2558.725098*mm,2658.347412*mm
    </Vector>
    <String name="PincerBlkName" value="EPCRBLK"/>
    <String name="PincerBlkMat" value="materials:E_Aluminium"/>
    <Numeric name="PincerBlkLength" value="15*mm"/>
    <String name="PincerShimMat" value="materials:StainlessSteel"/>
    <String name="PincerShim1Name" value="EPCRSHIM1"/>
    <Numeric name="PincerShimHeight" value="7.0*mm"/>
    <Numeric name="PincerShim1Width" value="5.1*mm"/>
    <String name="PincerShim2Name" value="EPCRSHIM2"/>
    <Numeric name="PincerShim2Width" value="0.5*mm"/>
    <String name="PincerCutName" value="EPCRCUT"/>
    <String name="PincerCutMat" value="materials:E_Air"/>
    <Numeric name="PincerCutWidth" value="5.0*mm"/>
    <Numeric name="PincerCutHeight" value="7.5*mm"/>
  </Algorithm>
</DDDefinition>