Warning, /Geometry/CSCGeometryBuilder/data/cscSpecs.xml is written in an unsupported language. File is not indexed.
0001 <?xml version="1.0" encoding="UTF-8"?>
0002 <DDDefinition xmlns="http://www.cern.ch/cms/DDL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.cern.ch/cms/DDL ../../../DetectorDescription/Schema/DDLSchema.xsd">
0003 <SpecParSection xmlns="http://www.cern.ch/cms/DDL" label="Try1" eval="true">
0004 <!-- p o r t e d f r o m ORCA/Data/MuonData/EndcapData Tim Cox-->
0005 <!-- converted for just physical chambers - ME1a & ME1b params part of ME11 - Tim Cox 02.04.2007-->
0006 <!-- added ME42 section copied from ME32 - Tim Cox 13.11.2007-->
0007 <!-- updated to match current non-ME42 version - Tim Cox 27.01.2009-->
0008 <!-- # =========================================================== -->
0009 <!-- # Parameters for Cathode Strip Chambers: ME11AlumFrame -->
0010 <!-- # =========================================================== -->
0011 <SpecPar name="ChamberSpecs_ME11">
0012 <PartSelector path="//ME11AlumFrame"/>
0013 <Parameter name="NoOfAnonParams" value="35"/>
0014 <!-- ME1b PARAMETERS FOLLOW -->
0015 <Parameter name="upar" value="0.015"/>
0016 <!--# 0 - strip resolution-->
0017 <Parameter name="upar" value="1.08"/>
0018 <!--# 1 - wire resolution-->
0019 <Parameter name="upar" value="1"/>
0020 <!--# 2 - efficiency-->
0021 <Parameter name="upar" value="10"/>
0022 <!--# 3 - time window (bx)-->
0023 <Parameter name="upar" value="0.00"/>
0024 <!--# 4 - neutron hit rate per CSC layer per event-->
0025 <Parameter name="upar" value="64"/>
0026 <!--# 5 - number of strips in each layer of chamber-->
0027 <Parameter name="upar" value="2"/>
0028 <!--# 6 - number of strips 2*nnodes+1 around hit-->
0029 <Parameter name="upar" value="11"/>
0030 <!--# 7 - No. of wires in group-->
0031 <Parameter name="upar" value="1"/>
0032 <!--# 8 - No. of floating strips-->
0033 <Parameter name="upar" value="0.35"/>
0034 <!--# 9 - "h" - Anode - Cathode spacing in cm-->
0035 <Parameter name="upar" value="6.00"/>
0036 <!--# 10 - gas gain-->
0037 <Parameter name="upar" value="2800"/>
0038 <!--# 11 - CSC Voltage-->
0039 <Parameter name="upar" value="29"/>
0040 <!--# 12 - tilt angle for CSC wire slope (+z)-->
0041 <Parameter name="upar" value="0.01"/>
0042 <!--# 13 - calibration error-->
0043 <Parameter name="upar" value="0.00000"/>
0044 <!--# 14 - e- attraction in gas-->
0045 <Parameter name="upar" value="0.12"/>
0046 <!--# 15 - f_ind = 0.4 * f_sh = 0.3-->
0047 <Parameter name="upar" value="0.125"/>
0048 <!--# 16 - ADC count (fC) (KATOD gain 4mV/fC; ADC 1 cnt/.5mV)-->
0049 <Parameter name="upar" value="0.0015"/>
0050 <!--# 17 - Anode wire radius-->
0051 <Parameter name="upar" value="30"/>
0052 <!--# 18 - Fast shaper peaking time (ns)-->
0053 <Parameter name="upar" value="120"/>
0054 <!--# 19 - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0055 <!--# 20 & 21 - strip offset in strip widths (alternate layers)-->
0056 <Parameter name="upar" value=".0"/>
0057 <Parameter name="upar" value=".0"/>
0058 <!--# 22 & 23 - (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0059 <Parameter name="upar" value="700"/>
0060 <Parameter name="upar" value="25"/>
0061 <!--# 24 - global nominal radial position of alignment pin (cm) -->
0062 <!-- No alignment pin for ME11 so just take bot edge of chamber frame -->
0063 <Parameter name="upar" value="100.5"/>
0064 <!--# 25 - distance from bottom edge of frame to alignment pin (cm) -->
0065 <Parameter name="upar" value="0.0"/>
0066 <!--# 26 - length of chamber from outer edges of frame (cm) -->
0067 <Parameter name="upar" value="162.0"/>
0068 <!--# 27 - distance from end of strip to alignment pin (cm) -->
0069 <!-- No alignment pin for ME11 so w.r.t. bot edge of chamber frame -->
0070 <Parameter name="upar" value="49.5"/>
0071 <!--# 28 - length of (sensitive region of) strip along local y axis (cm) -->
0072 <Parameter name="upar" value="107.5"/>
0073 <!--# 29 - strip deltaPhi (mrad) -->
0074 <Parameter name="upar" value="2.958185"/>
0075 <!--# 30 - ctiOffset - possible future use -->
0076 <Parameter name="upar" value="0.0"/>
0077 <!--# 31 - chamber frame thickness (mm) TREAT AS ZERO SINCE THEY HAVE NO FRAME-->
0078 <Parameter name="upar" value="0.0"/>
0079 <!--# 32 - gas gap thickness (mm) -->
0080 <Parameter name="upar" value="7.0"/>
0081 <!--# 33 - panel thickness (mm) -->
0082 <Parameter name="upar" value="15.0"/>
0083 <!--# 34 - zlocal offset between AF and average AGV centre (mm) = zC - (zL1+zL2)/2 -->
0084 <Parameter name="upar" value="1.7"/>
0085 <!-- ME1a PARAMETERS FOLLOW, EACH INDEX IS REALLY (#+34) -->
0086 <Parameter name="upar" value="0.015"/>
0087 <!--# 0 - strip resolution-->
0088 <Parameter name="upar" value="1.08"/>
0089 <!--# 1 - wire resolution-->
0090 <Parameter name="upar" value="1"/>
0091 <!--# 2 - efficiency-->
0092 <Parameter name="upar" value="10"/>
0093 <!--# 3 - time window (bx)-->
0094 <Parameter name="upar" value="0.00"/>
0095 <!--# 4 - neutron hit rate per CSC layer per event-->
0096 <Parameter name="upar" value="48"/>
0097 <!--# 5 - number of strips in each layer of chamber-->
0098 <Parameter name="upar" value="2"/>
0099 <!--# 6 - number of strips 2*nnodes+1 around hit-->
0100 <Parameter name="upar" value="11"/>
0101 <!--# 7 - No. of wires in group-->
0102 <Parameter name="upar" value="1"/>
0103 <!--# 8 - No. of floating strips-->
0104 <Parameter name="upar" value="0.35"/>
0105 <!--# 9 - "h" - Anode - Cathode spacing in cm-->
0106 <Parameter name="upar" value="6.00"/>
0107 <!--# 10 - gas gain-->
0108 <Parameter name="upar" value="2800"/>
0109 <!--# 11 - CSC Voltage-->
0110 <Parameter name="upar" value="29"/>
0111 <!--# 12 - tilt angle for CSC wire slope (+z)-->
0112 <Parameter name="upar" value="0.01"/>
0113 <!--# 13 - calibration error-->
0114 <Parameter name="upar" value="0.00000"/>
0115 <!--# 14 - e- attraction in gas-->
0116 <Parameter name="upar" value="0.12"/>
0117 <!--# 15 - f_ind = 0.4 * f_sh = 0.3-->
0118 <Parameter name="upar" value="0.5"/>
0119 <!--# 16 - ADC count (fC) (KATOD gain 4mV/fC; ADC 1 cnt/.5mV)-->
0120 <Parameter name="upar" value="0.0015"/>
0121 <!--# 17 - Anode wire radius-->
0122 <Parameter name="upar" value="30"/>
0123 <!--# 18 - Fast shaper peaking time (ns)-->
0124 <Parameter name="upar" value="80"/>
0125 <!--# 19 - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0126 <!--# 20 & 21 - strip offset in strip widths (alternate layers)-->
0127 <Parameter name="upar" value=".0"/>
0128 <Parameter name="upar" value=".0"/>
0129 <!--# 22 & 23 - (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0130 <Parameter name="upar" value="700"/>
0131 <Parameter name="upar" value="25"/>
0132 <!--# 24 - global nominal radial position of alignment pin (cm) -->
0133 <!-- No alignment pin for ME11 so just take bot edge of chamber frame -->
0134 <Parameter name="upar" value="100.5"/>
0135 <!--# 25 - distance from bottom edge of frame to alignment pin (cm) -->
0136 <Parameter name="upar" value="0.0"/>
0137 <!--# 26 - length of chamber from outer edges of frame (cm) -->
0138 <Parameter name="upar" value="162.0"/>
0139 <!--# 27 - distance from end of strip to alignment pin (cm) -->
0140 <!-- No alignment pin for ME11 so w.r.t. bot edge of chamber frame -->
0141 <Parameter name="upar" value="5.0"/>
0142 <!--# 28 - length of (sensitive region of) strip along local y axis (cm) -->
0143 <Parameter name="upar" value="44.5"/>
0144 <!--# 29 - strip deltaPhi (mrad) -->
0145 <Parameter name="upar" value="3.878509"/>
0146 <!--# 30 - ctiOffset - possible future use -->
0147 <Parameter name="upar" value="0.0"/>
0148 <!--# 31 - chamber frame thickness (mm) -->
0149 <Parameter name="upar" value="0.0"/>
0150 <!--# 32 - gas gap thickness (mm) -->
0151 <Parameter name="upar" value="7.0"/>
0152 <!--# 33 - panel thickness (mm) -->
0153 <Parameter name="upar" value="15.0"/>
0154 <!--# 34 - zlocal offset between AF and average AGV centre (mm) -->
0155 <Parameter name="upar" value="1.7"/>
0156 <!-- Wire group specs.
0157 The wire grouping is specified by two vectors NumGroups and NumWiresPerGrp, of the same length.
0158 The elements of NumGroups specify the number of consecutive groups of wires of a specific size,
0159 with this size (i.e. number of wires) specified in the corresponding element of NumWiresPerGrp.
0160 A dead region (or where there are no wires) is specified by a 0 in the appropriate position
0161 in NumGroups, and the corresponding element in NumWiresPerGrp contains the number of 'virtual'
0162 wires to define the extent of the dead region.
0163
0164 e.g. ME11: 1 group of 37 wires, then 46 groups of 11 wires, and finally 1 group of 43 wires.
0165 There are (apparently) no dead wire regions in ME11.
0166
0167 Note that, for reasons that escape me, the total number of grouped wires
0168 is only 586 rather than the nominal 587.
0169
0170 For ME11, no alignment pin so give value for first wire from bottom edge chamber frame.
0171 And 'LengthOfxxxWire' is effective width of wire plane at bottom and top.
0172 -->
0173 <Parameter name="WireSpacing" value="2.5*mm"/>
0174 <Parameter name="AlignmentPinToFirstWire" value="10.646*mm"/>
0175 <Parameter name="LengthOfFirstWire" value="201.3*mm"/>
0176 <Parameter name="LengthOfLastWire" value="487.1*mm"/>
0177 <Parameter name="RadialExtentOfWirePlane" value="1505.0*mm"/>
0178 <Parameter name="TotNumWireGroups" value="48"/>
0179 <Parameter name="NumGroups" value="1"/>
0180 <Parameter name="NumGroups" value="46"/>
0181 <Parameter name="NumGroups" value="1"/>
0182 <Parameter name="NumWiresPerGrp" value="37"/>
0183 <Parameter name="NumWiresPerGrp" value="11"/>
0184 <Parameter name="NumWiresPerGrp" value="43"/>
0185 </SpecPar>
0186 <!--# ========================================================-->
0187 <!--# Parameters for Cathode Strip Chambers: ME12AlumFrame -->
0188 <!--# ========================================================-->
0189 <SpecPar name="ChamberSpecs_ME12">
0190 <PartSelector path="//ME12AlumFrame"/>
0191 <Parameter name="upar" value="0.015"/>
0192 <!--# 0 - strip resolution-->
0193 <Parameter name="upar" value="0.9815"/>
0194 <!--# 1 - wire resolution-->
0195 <Parameter name="upar" value="1"/>
0196 <!--# 2 - efficiency-->
0197 <Parameter name="upar" value="10"/>
0198 <!--# 3 - time window (bx)-->
0199 <Parameter name="upar" value="0.00"/>
0200 <!--# 4 - neutron hit rate per CSC layer per event-->
0201 <Parameter name="upar" value="80"/>
0202 <!--# 5 - number of strips in each layer of chamber-->
0203 <Parameter name="upar" value="2"/>
0204 <!--# 6 - number of strips 2*nnodes+1 around hit-->
0205 <Parameter name="upar" value="11"/>
0206 <!--# 7 - No. of wires in group-->
0207 <Parameter name="upar" value="0."/>
0208 <!--# 8 - No. of floating strips-->
0209 <Parameter name="upar" value="0.47625"/>
0210 <!--# 9 - "h" - Anode - Cathode spacing-->
0211 <Parameter name="upar" value="8.88"/>
0212 <!--# 10 - gas gain-->
0213 <Parameter name="upar" value="4000"/>
0214 <!--# 11 - CSC Voltage-->
0215 <Parameter name="upar" value="0.000"/>
0216 <!--# 12 - tilt angle for CSC wire slope (+z)-->
0217 <Parameter name="upar" value="0.01"/>
0218 <!--# 13 - calibration error-->
0219 <Parameter name="upar" value="0.5"/>
0220 <!--# 14 - e- attraction in gas-->
0221 <Parameter name="upar" value="0.0779"/>
0222 <!--# 15 - f_ind = 0.41 * f_sh = 0.19-->
0223 <Parameter name="upar" value="0.5"/>
0224 <!--# 16 - ADC count (fC)-->
0225 <Parameter name="upar" value="0.0025"/>
0226 <!--# 17 - Anode wire radius-->
0227 <Parameter name="upar" value="50"/>
0228 <!--# 18 - Fast shaper peaking time (ns)-->
0229 <Parameter name="upar" value="120"/>
0230 <!--# 19 - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0231 <!--# 20 & 21 - strip offset in strip widths (alternate layers)-->
0232 <Parameter name="upar" value="-0.25"/>
0233 <Parameter name="upar" value="0.25"/>
0234 <!--# 22 & 23 - (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0235 <Parameter name="upar" value="700"/>
0236 <Parameter name="upar" value="25"/>
0237 <!--# 24 - global nominal radial position of alignment pin (cm) -->
0238 <Parameter name="upar" value="278.49"/>
0239 <!--# 25 - distance from bottom edge of frame to alignment pin (cm) -->
0240 <Parameter name="upar" value="3.49"/>
0241 <!--# 26 - length of chamber from outer edges of frame (cm) -->
0242 <Parameter name="upar" value="189.4"/>
0243 <!--# 27 - distance from end of strip to alignment pin (cm) -->
0244 <Parameter name="upar" value="3.01"/>
0245 <!--# 28 - length of (sensitive region of) strip along local y axis (cm) -->
0246 <Parameter name="upar" value="174.49"/>
0247 <!--# 29 - strip deltaPhi (mrad) -->
0248 <Parameter name="upar" value="2.327105"/>
0249 <!--# 30 - ctiOffset - possible future use -->
0250 <Parameter name="upar" value="0.0"/>
0251 <!--# 31 - chamber frame thickness (mm) -->
0252 <Parameter name="upar" value="6.096"/>
0253 <!--# 32 - gas gap thickness (mm) -->
0254 <Parameter name="upar" value="9.525"/>
0255 <!--# 33 - panel thickness (mm) -->
0256 <Parameter name="upar" value="15.875"/>
0257 <!--# 34 - zlocal offset between AF and average AGV centre (mm) -->
0258 <Parameter name="upar" value="-1.71"/>
0259 <!-- Wire group specs.
0260 The wire grouping is specified by two vectors NumGroups and NumWiresPerGrp, of the same length.
0261 The elements of NumGroups specify the number of consecutive groups of wires of a specific size,
0262 with this size (i.e. number of wires) specified in the corresponding element of NumWiresPerGrp.
0263 A dead region (or where there are no wires) is specified by a 0 in the appropriate position
0264 in NumGroups, and the corresponding element in NumWiresPerGrp contains the number of 'virtual'
0265 wires to define the extent of the dead region.
0266
0267 e.g. ME12: 16 groups of 7 wires, 7 groups of 8 wires, 1 group of 5, a dead region of 6, etc.
0268 -->
0269 <Parameter name="WireSpacing" value="3.16108*mm"/>
0270 <Parameter name="AlignmentPinToFirstWire" value="28.5*mm"/>
0271 <Parameter name="LengthOfFirstWire" value="510.0*mm"/>
0272 <Parameter name="LengthOfLastWire" value="837.4*mm"/>
0273 <Parameter name="RadialExtentOfWirePlane" value="1748.1*mm"/>
0274 <Parameter name="TotNumWireGroups" value="64"/>
0275 <Parameter name="NumGroups" value="16"/>
0276 <Parameter name="NumGroups" value="7"/>
0277 <Parameter name="NumGroups" value="1"/>
0278 <Parameter name="NumGroups" value="0"/>
0279 <Parameter name="NumGroups" value="1"/>
0280 <Parameter name="NumGroups" value="7"/>
0281 <Parameter name="NumGroups" value="15"/>
0282 <Parameter name="NumGroups" value="1"/>
0283 <Parameter name="NumGroups" value="0"/>
0284 <Parameter name="NumGroups" value="1"/>
0285 <Parameter name="NumGroups" value="7"/>
0286 <Parameter name="NumGroups" value="7"/>
0287 <Parameter name="NumGroups" value="1"/>
0288 <Parameter name="NumWiresPerGrp" value="7"/>
0289 <Parameter name="NumWiresPerGrp" value="8"/>
0290 <Parameter name="NumWiresPerGrp" value="5"/>
0291 <Parameter name="NumWiresPerGrp" value="6"/>
0292 <Parameter name="NumWiresPerGrp" value="5"/>
0293 <Parameter name="NumWiresPerGrp" value="8"/>
0294 <Parameter name="NumWiresPerGrp" value="9"/>
0295 <Parameter name="NumWiresPerGrp" value="6"/>
0296 <Parameter name="NumWiresPerGrp" value="6"/>
0297 <Parameter name="NumWiresPerGrp" value="7"/>
0298 <Parameter name="NumWiresPerGrp" value="10"/>
0299 <Parameter name="NumWiresPerGrp" value="11"/>
0300 <Parameter name="NumWiresPerGrp" value="13"/>
0301 </SpecPar>
0302 <!--# ========================================================-->
0303 <!--# Parameters for Cathode Strip Chambers: ME13AlumFrame -->
0304 <!--# ========================================================-->
0305 <SpecPar name="ChamberSpecs_ME13">
0306 <PartSelector path="//ME13AlumFrame"/>
0307 <Parameter name="upar" value="0.03"/>
0308 <!--# 0 - strip resolution-->
0309 <Parameter name="upar" value="1.3741"/>
0310 <!--# 1 - wire resolution-->
0311 <Parameter name="upar" value="1"/>
0312 <!--# 2 - efficiency-->
0313 <Parameter name="upar" value="10"/>
0314 <!--# 3 - time window (bx)-->
0315 <Parameter name="upar" value="0.00"/>
0316 <!--# 4 - neutron hit rate per CSC layer per event-->
0317 <Parameter name="upar" value="64"/>
0318 <!--# 5 - number of strips in each layer of chamber-->
0319 <Parameter name="upar" value="2"/>
0320 <!--# 6 - number of strips 2*nnodes+1 around hit-->
0321 <Parameter name="upar" value="12"/>
0322 <!--# 7 - No. of wires in group-->
0323 <Parameter name="upar" value="0."/>
0324 <!--# 8 - No. of floating strips-->
0325 <Parameter name="upar" value="0.47625"/>
0326 <!--# 9 - "h" - Anode - Cathode spacing-->
0327 <Parameter name="upar" value="8.89"/>
0328 <!--# 10 - gas gain-->
0329 <Parameter name="upar" value="4000"/>
0330 <!--# 11 - CSC Voltage-->
0331 <Parameter name="upar" value="0.00000E+00"/>
0332 <!--# 12 - tilt angle for CSC wire slope (+z)-->
0333 <Parameter name="upar" value="0.01"/>
0334 <!--# 13 - calibration error-->
0335 <Parameter name="upar" value="0.5"/>
0336 <!--# 14 - e- attraction in gas-->
0337 <Parameter name="upar" value="0.0779"/>
0338 <!--# 15 - f_ind = 0.41 * f_sh = 0.19-->
0339 <Parameter name="upar" value="0.5"/>
0340 <!--# 16 - ADC count (fC)-->
0341 <Parameter name="upar" value="0.0025"/>
0342 <!--# 17 - Anode wire radius-->
0343 <Parameter name="upar" value="50"/>
0344 <!--# 18 - Fast shaper peaking time (ns)-->
0345 <Parameter name="upar" value="120"/>
0346 <!--# 19 - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0347 <!--# 20 & 21 - strip offset in strip widths (alternate layers)-->
0348 <Parameter name="upar" value="-0.25"/>
0349 <Parameter name="upar" value="0.25"/>
0350 <!--# 22 & 23 - (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0351 <Parameter name="upar" value="700"/>
0352 <Parameter name="upar" value="25"/>
0353 <!--# 24 - global nominal radial position of alignment pin (cm) -->
0354 <Parameter name="upar" value="508.99"/>
0355 <!--# 25 - distance from bottom edge of frame to alignment pin (cm) -->
0356 <Parameter name="upar" value="3.49"/>
0357 <!--# 26 - length of chamber from outer edges of frame (cm) -->
0358 <Parameter name="upar" value="179.3"/>
0359 <!--# 27 - distance from end of strip to alignment pin (cm) -->
0360 <Parameter name="upar" value="3.00"/>
0361 <!--# 28 - length of (sensitive region of) strip along local y axis (cm) -->
0362 <Parameter name="upar" value="164.16"/>
0363 <!--# 29 - strip deltaPhi (mrad) -->
0364 <Parameter name="upar" value="2.152552"/>
0365 <!--# 30 - ctiOffset - possible future use -->
0366 <Parameter name="upar" value="0.0"/>
0367 <!--# 31 - chamber frame thickness (mm) -->
0368 <Parameter name="upar" value="6.096"/>
0369 <!--# 32 - gas gap thickness (mm) -->
0370 <Parameter name="upar" value="9.525"/>
0371 <!--# 33 - panel thickness (mm) -->
0372 <Parameter name="upar" value="15.875"/>
0373 <!--# 34 - zlocal offset between AF and average AGV centre (mm) -->
0374 <Parameter name="upar" value="-1.71"/>
0375 <!-- Wire group specs.
0376 The wire grouping is specified by two vectors NumGroups and NumWiresPerGrp, of the same length.
0377 The elements of NumGroups specify the number of consecutive groups of wires of a specific size,
0378 with this size (i.e. number of wires) specified in the corresponding element of NumWiresPerGrp.
0379 A dead region (or where there are no wires) is specified by a 0 in the appropriate position
0380 in NumGroups, and the corresponding element in NumWiresPerGrp contains the number of 'virtual'
0381 wires to define the extent of the dead region.
0382
0383 e.g. ME13: 11 groups of 16 wires, 1 group of 13, a dead region of 6, etc.
0384 -->
0385 <Parameter name="WireSpacing" value="3.16292*mm"/>
0386 <Parameter name="AlignmentPinToFirstWire" value="28.5*mm"/>
0387 <Parameter name="LengthOfFirstWire" value="634.0*mm"/>
0388 <Parameter name="LengthOfLastWire" value="921.0*mm"/>
0389 <Parameter name="RadialExtentOfWirePlane" value="1644.7*mm"/>
0390 <Parameter name="TotNumWireGroups" value="32"/>
0391 <Parameter name="NumGroups" value="11"/>
0392 <Parameter name="NumGroups" value="1"/>
0393 <Parameter name="NumGroups" value="0"/>
0394 <Parameter name="NumGroups" value="1"/>
0395 <Parameter name="NumGroups" value="8"/>
0396 <Parameter name="NumGroups" value="1"/>
0397 <Parameter name="NumGroups" value="0"/>
0398 <Parameter name="NumGroups" value="1"/>
0399 <Parameter name="NumGroups" value="1"/>
0400 <Parameter name="NumGroups" value="7"/>
0401 <Parameter name="NumGroups" value="1"/>
0402 <Parameter name="NumWiresPerGrp" value="16"/>
0403 <Parameter name="NumWiresPerGrp" value="13"/>
0404 <Parameter name="NumWiresPerGrp" value="6"/>
0405 <Parameter name="NumWiresPerGrp" value="13"/>
0406 <Parameter name="NumWiresPerGrp" value="16"/>
0407 <Parameter name="NumWiresPerGrp" value="13"/>
0408 <Parameter name="NumWiresPerGrp" value="6"/>
0409 <Parameter name="NumWiresPerGrp" value="13"/>
0410 <Parameter name="NumWiresPerGrp" value="16"/>
0411 <Parameter name="NumWiresPerGrp" value="17"/>
0412 <Parameter name="NumWiresPerGrp" value="18"/>
0413 </SpecPar>
0414 <!--# ========================================================-->
0415 <!--# Parameters for Cathode Strip Chambers: ME21AlumFrame -->
0416 <!--# ========================================================-->
0417 <SpecPar name="ChamberSpecs_ME21">
0418 <PartSelector path="//ME21AlumFrame"/>
0419 <Parameter name="upar" value="0.03"/>
0420 <!--# 0 - strip resolution-->
0421 <Parameter name="upar" value="0.9815"/>
0422 <!--# 1 - wire resolution-->
0423 <Parameter name="upar" value="1"/>
0424 <!--# 2 - efficiency-->
0425 <Parameter name="upar" value="10"/>
0426 <!--# 3 - time window (bx)-->
0427 <Parameter name="upar" value="0.00"/>
0428 <!--# 4 - neutron hit rate per CSC layer per event-->
0429 <Parameter name="upar" value="80"/>
0430 <!--# 5 - number of strips in each layer of chamber-->
0431 <Parameter name="upar" value="2"/>
0432 <!--# 6 - number of strips 2*nnodes+1 around hit-->
0433 <Parameter name="upar" value="5"/>
0434 <!--# 7 - No. of wires in group-->
0435 <Parameter name="upar" value="0."/>
0436 <!--# 8 - No. of floating strips-->
0437 <Parameter name="upar" value="0.47625"/>
0438 <!--# 9 - "h" - Anode - Cathode spacing-->
0439 <Parameter name="upar" value="1.0"/>
0440 <!--# 10 - gas gain-->
0441 <Parameter name="upar" value="4000"/>
0442 <!--# 11 - CSC Voltage-->
0443 <Parameter name="upar" value="0.00000E+00"/>
0444 <!--# 12 - tilt angle for CSC wire slope (+z)-->
0445 <Parameter name="upar" value="0.01"/>
0446 <!--# 13 - calibration error-->
0447 <Parameter name="upar" value="0.5"/>
0448 <!--# 14 - e- attraction in gas-->
0449 <Parameter name="upar" value="0.0779"/>
0450 <!--# 15 - f_ind = 0.41 * f_sh = 0.19-->
0451 <Parameter name="upar" value="0.5"/>
0452 <!--# 16 - ADC count (fC)-->
0453 <Parameter name="upar" value="0.0025"/>
0454 <!--# 17 - Anode wire radius-->
0455 <Parameter name="upar" value="50"/>
0456 <!--# 18 - Fast shaper peaking time (ns)-->
0457 <Parameter name="upar" value="120"/>
0458 <!--# 19 - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0459 <!--# 20 & 21 - strip offset in strip widths (alternate layers)-->
0460 <Parameter name="upar" value="-0.25"/>
0461 <Parameter name="upar" value="0.25"/>
0462 <!--# 22 & 23 - (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0463 <Parameter name="upar" value="700"/>
0464 <Parameter name="upar" value="25"/>
0465 <!--# 24 - global nominal radial position of alignment pin (cm) -->
0466 <Parameter name="upar" value="143.89"/>
0467 <!--# 25 - distance from bottom edge of frame to alignment pin (cm) -->
0468 <Parameter name="upar" value="3.49"/>
0469 <!--# 26 - length of chamber from outer edges of frame (cm) -->
0470 <Parameter name="upar" value="204.6"/>
0471 <!--# 27 - distance from end of strip to alignment pin (cm) -->
0472 <Parameter name="upar" value="3.01"/>
0473 <!--# 28 - length of (sensitive region of) strip along local y axis (cm) -->
0474 <Parameter name="upar" value="189.66"/>
0475 <!--# 29 - strip deltaPhi (mrad) -->
0476 <Parameter name="upar" value="4.654210"/>
0477 <!--# 30 - ctiOffset - possible future use -->
0478 <Parameter name="upar" value="0.0"/>
0479 <!--# 31 - chamber frame thickness (mm) -->
0480 <Parameter name="upar" value="6.096"/>
0481 <!--# 32 - gas gap thickness (mm) -->
0482 <Parameter name="upar" value="9.525"/>
0483 <!--# 33 - panel thickness (mm) -->
0484 <Parameter name="upar" value="15.875"/>
0485 <!--# 34 - zlocal offset between AF and average AGV centre (mm) -->
0486 <Parameter name="upar" value="-1.71"/>
0487 <!-- Wire group specs.
0488 The wire grouping is specified by two vectors NumGroups and NumWiresPerGrp, of the same length.
0489 The elements of NumGroups specify the number of consecutive groups of wires of a specific size,
0490 with this size (i.e. number of wires) specified in the corresponding element of NumWiresPerGrp.
0491 A dead region (or where there are no wires) is specified by a 0 in the appropriate position
0492 in NumGroups, and the corresponding element in NumWiresPerGrp contains the number of 'virtual'
0493 wires to define the extent of the dead region.
0494
0495 e.g. ME21:43 groups of 5 wires, 1 group of 2, a dead region of 6, 1 group of 2, etc.
0496 -->
0497 <Parameter name="WireSpacing" value="3.11945*mm"/>
0498 <Parameter name="AlignmentPinToFirstWire" value="28.7*mm"/>
0499 <Parameter name="LengthOfFirstWire" value="540.0*mm"/>
0500 <Parameter name="LengthOfLastWire" value="1257.1*mm"/>
0501 <Parameter name="RadialExtentOfWirePlane" value="1899.7*mm"/>
0502 <Parameter name="TotNumWireGroups" value="112"/>
0503 <Parameter name="NumGroups" value="43"/>
0504 <Parameter name="NumGroups" value="1"/>
0505 <Parameter name="NumGroups" value="0"/>
0506 <Parameter name="NumGroups" value="1"/>
0507 <Parameter name="NumGroups" value="19"/>
0508 <Parameter name="NumGroups" value="15"/>
0509 <Parameter name="NumGroups" value="1"/>
0510 <Parameter name="NumGroups" value="0"/>
0511 <Parameter name="NumGroups" value="1"/>
0512 <Parameter name="NumGroups" value="30"/>
0513 <Parameter name="NumGroups" value="1"/>
0514 <Parameter name="NumWiresPerGrp" value="5"/>
0515 <Parameter name="NumWiresPerGrp" value="2"/>
0516 <Parameter name="NumWiresPerGrp" value="6"/>
0517 <Parameter name="NumWiresPerGrp" value="2"/>
0518 <Parameter name="NumWiresPerGrp" value="5"/>
0519 <Parameter name="NumWiresPerGrp" value="6"/>
0520 <Parameter name="NumWiresPerGrp" value="3"/>
0521 <Parameter name="NumWiresPerGrp" value="6"/>
0522 <Parameter name="NumWiresPerGrp" value="3"/>
0523 <Parameter name="NumWiresPerGrp" value="6"/>
0524 <Parameter name="NumWiresPerGrp" value="8"/>
0525 </SpecPar>
0526 <!--# ========================================================-->
0527 <!--# Parameters for Cathode Strip Chambers: ME31AlumFrame -->
0528 <!--# ========================================================-->
0529 <SpecPar name="ChamberSpecs_ME31">
0530 <PartSelector path="//ME31AlumFrame"/>
0531 <Parameter name="upar" value="0.03"/>
0532 <!--# 0 - strip resolution-->
0533 <Parameter name="upar" value="0.88335"/>
0534 <!--# 1 - wire resolution-->
0535 <Parameter name="upar" value="1"/>
0536 <!--# 2 - efficiency-->
0537 <Parameter name="upar" value="10"/>
0538 <!--# 3 - time window (bx)-->
0539 <Parameter name="upar" value="0.00"/>
0540 <!--# 4 - neutron hit rate per CSC layer per event-->
0541 <Parameter name="upar" value="80"/>
0542 <!--# 5 - number of strips in each layer of chamber-->
0543 <Parameter name="upar" value="2"/>
0544 <!--# 6 - number of strips 2*nnodes+1 around hit-->
0545 <Parameter name="upar" value="6"/>
0546 <!--# 7 - No. of wires in group-->
0547 <Parameter name="upar" value="0."/>
0548 <!--# 8 - No. of floating strips-->
0549 <Parameter name="upar" value="0.47625"/>
0550 <!--# 9 - "h" - Anode - Cathode spacing-->
0551 <Parameter name="upar" value="1.0"/>
0552 <!--# 10 - gas gain-->
0553 <Parameter name="upar" value="4000"/>
0554 <!--# 11 - CSC Voltage-->
0555 <Parameter name="upar" value="0.00000E+00"/>
0556 <!--# 12 - tilt angle for CSC wire slope (+z)-->
0557 <Parameter name="upar" value="0.01"/>
0558 <!--# 13 - calibration error-->
0559 <Parameter name="upar" value="0.5"/>
0560 <!--# 14 - e- attraction in gas-->
0561 <Parameter name="upar" value="0.0779"/>
0562 <!--# 15 - f_ind = 0.41 * f_sh = 0.19-->
0563 <Parameter name="upar" value="0.5"/>
0564 <!--# 16 - ADC count (fC)-->
0565 <Parameter name="upar" value="0.0025"/>
0566 <!--# 17 - Anode wire radius-->
0567 <Parameter name="upar" value="50"/>
0568 <!--# 18 - Fast shaper peaking time (ns)-->
0569 <Parameter name="upar" value="120"/>
0570 <!--# 19 - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0571 <!--# 20 & 21 - strip offset in strip widths (alternate layers)-->
0572 <Parameter name="upar" value="-0.25"/>
0573 <Parameter name="upar" value="0.25"/>
0574 <!--# 22 & 23 - (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0575 <Parameter name="upar" value="700"/>
0576 <Parameter name="upar" value="25"/>
0577 <!--# 24 - global nominal radial position of alignment pin (cm) -->
0578 <Parameter name="upar" value="163.89"/>
0579 <!--# 25 - distance from bottom edge of frame to alignment pin (cm) -->
0580 <Parameter name="upar" value="3.49"/>
0581 <!--# 26 - length of chamber from outer edges of frame (cm) -->
0582 <Parameter name="upar" value="184.6"/>
0583 <!--# 27 - distance from end of strip to alignment pin (cm) -->
0584 <Parameter name="upar" value="3.00"/>
0585 <!--# 28 - length of (sensitive region of) strip along local y axis (cm) -->
0586 <Parameter name="upar" value="169.70"/>
0587 <!--# 29 - strip deltaPhi (mrad) -->
0588 <Parameter name="upar" value="4.654210"/>
0589 <!--# 30 - ctiOffset - possible future use -->
0590 <Parameter name="upar" value="0.0"/>
0591 <!--# 31 - chamber frame thickness (mm) -->
0592 <Parameter name="upar" value="6.096"/>
0593 <!--# 32 - gas gap thickness (mm) -->
0594 <Parameter name="upar" value="9.525"/>
0595 <!--# 33 - panel thickness (mm) -->
0596 <Parameter name="upar" value="15.875"/>
0597 <!--# 34 - zlocal offset between AF and average AGV centre (mm) -->
0598 <Parameter name="upar" value="1.71"/>
0599 <!-- Wire group specs.
0600 The wire grouping is specified by two vectors NumGroups and NumWiresPerGrp, of the same length.
0601 The elements of NumGroups specify the number of consecutive groups of wires of a specific size,
0602 with this size (i.e. number of wires) specified in the corresponding element of NumWiresPerGrp.
0603 A dead region (or where there are no wires) is specified by a 0 in the appropriate position
0604 in NumGroups, and the corresponding element in NumWiresPerGrp contains the number of 'virtual'
0605 wires to define the extent of the dead region.
0606
0607 e.g. ME31: 31 groups of 5 wires, 1 group of 2, a dead region of 6, etc.
0608 -->
0609 <Parameter name="WireSpacing" value="3.11945*mm"/>
0610 <Parameter name="AlignmentPinToFirstWire" value="28.4*mm"/>
0611 <Parameter name="LengthOfFirstWire" value="614.0*mm"/>
0612 <Parameter name="LengthOfLastWire" value="1257.1*mm"/>
0613 <Parameter name="RadialExtentOfWirePlane" value="1700.1*mm"/>
0614 <Parameter name="TotNumWireGroups" value="96"/>
0615 <Parameter name="NumGroups" value="31"/>
0616 <Parameter name="NumGroups" value="1"/>
0617 <Parameter name="NumGroups" value="0"/>
0618 <Parameter name="NumGroups" value="1"/>
0619 <Parameter name="NumGroups" value="30"/>
0620 <Parameter name="NumGroups" value="1"/>
0621 <Parameter name="NumGroups" value="0"/>
0622 <Parameter name="NumGroups" value="1"/>
0623 <Parameter name="NumGroups" value="30"/>
0624 <Parameter name="NumGroups" value="1"/>
0625 <Parameter name="NumWiresPerGrp" value="5"/>
0626 <Parameter name="NumWiresPerGrp" value="2"/>
0627 <Parameter name="NumWiresPerGrp" value="6"/>
0628 <Parameter name="NumWiresPerGrp" value="3"/>
0629 <Parameter name="NumWiresPerGrp" value="6"/>
0630 <Parameter name="NumWiresPerGrp" value="3"/>
0631 <Parameter name="NumWiresPerGrp" value="6"/>
0632 <Parameter name="NumWiresPerGrp" value="3"/>
0633 <Parameter name="NumWiresPerGrp" value="6"/>
0634 <Parameter name="NumWiresPerGrp" value="8"/>
0635 </SpecPar>
0636 <!--# ========================================================-->
0637 <!--# Parameters for Cathode Strip Chambers: ME41AlumFrame -->
0638 <!--# ========================================================-->
0639 <SpecPar name="ChamberSpecs_ME41">
0640 <PartSelector path="//ME41AlumFrame"/>
0641 <Parameter name="upar" value="0.30000"/>
0642 <!--# 0 - strip resolution (if no MF4: set to 1m)-->
0643 <Parameter name="upar" value="0.88335"/>
0644 <!--# 1 - wire resolution-->
0645 <Parameter name="upar" value="1"/>
0646 <!--# 2 - efficiency-->
0647 <Parameter name="upar" value="10"/>
0648 <!--# 3 - time window (bx)-->
0649 <Parameter name="upar" value="0.00"/>
0650 <!--# 4 - neutron hit rate per CSC layer per event-->
0651 <Parameter name="upar" value="80"/>
0652 <!--# 5 - number of strips in each layer of chamber-->
0653 <Parameter name="upar" value="2"/>
0654 <!--# 6 - number of strips 2*nnodes+1 around hit-->
0655 <Parameter name="upar" value="5"/>
0656 <!--# 7 - No. of wires in group-->
0657 <Parameter name="upar" value="0."/>
0658 <!--# 8 - No. of floating strips-->
0659 <Parameter name="upar" value="0.47625"/>
0660 <!--# 9 - "h" - Anode - Cathode spacing-->
0661 <Parameter name="upar" value="1.0"/>
0662 <!--# 10 - gas gain-->
0663 <Parameter name="upar" value="4000"/>
0664 <!--# 11 - CSC Voltage-->
0665 <Parameter name="upar" value="0.00000E+00"/>
0666 <!--# 12 - tilt angle for CSC wire slope (+z)-->
0667 <Parameter name="upar" value="0.01"/>
0668 <!--# 13 - calibration error-->
0669 <Parameter name="upar" value="0.5"/>
0670 <!--# 14 - e- attraction in gas-->
0671 <Parameter name="upar" value="0.0779"/>
0672 <!--# 15 - f_ind = 0.41 * f_sh = 0.19-->
0673 <Parameter name="upar" value="0.5"/>
0674 <!--# 16 - ADC count (fC)-->
0675 <Parameter name="upar" value="0.0025"/>
0676 <!--# 17 - Anode wire radius-->
0677 <Parameter name="upar" value="50"/>
0678 <!--# 18 - Fast shaper peaking time (ns)-->
0679 <Parameter name="upar" value="120"/>
0680 <!--# 19 - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0681 <!--# 20 & 21 - strip offset in strip widths (alternate layers)-->
0682 <Parameter name="upar" value="-0.25"/>
0683 <Parameter name="upar" value="0.25"/>
0684 <!--# 22 & 23 - (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0685 <Parameter name="upar" value="700"/>
0686 <Parameter name="upar" value="25"/>
0687 <!--# 24 - global nominal radial position of alignment pin (cm) -->
0688 <Parameter name="upar" value="183.79"/>
0689 <!--# 25 - distance from bottom edge of frame to alignment pin (cm) -->
0690 <Parameter name="upar" value="3.49"/>
0691 <!--# 26 - length of chamber from outer edges of frame (cm) -->
0692 <Parameter name="upar" value="164.7"/>
0693 <!--# 27 - distance from end of strip to alignment pin (cm) -->
0694 <Parameter name="upar" value="3.20"/>
0695 <!--# 28 - length of (sensitive region of) strip along local y axis (cm) -->
0696 <Parameter name="upar" value="149.42"/>
0697 <!--# 29 - strip deltaPhi (mrad) -->
0698 <Parameter name="upar" value="4.654210"/>
0699 <!--# 30 - ctiOffset - possible future use -->
0700 <Parameter name="upar" value="0.0"/>
0701 <!--# 31 - chamber frame thickness (mm) -->
0702 <Parameter name="upar" value="6.096"/>
0703 <!--# 32 - gas gap thickness (mm) -->
0704 <Parameter name="upar" value="9.525"/>
0705 <!--# 33 - panel thickness (mm) -->
0706 <Parameter name="upar" value="15.875"/>
0707 <!--# 34 - zlocal offset between AF and average AGV centre (mm) -->
0708 <Parameter name="upar" value="1.71"/>
0709 <!-- Wire group specs.
0710 The wire grouping is specified by two vectors NumGroups and NumWiresPerGrp, of the same length.
0711 The elements of NumGroups specify the number of consecutive groups of wires of a specific size,
0712 with this size (i.e. number of wires) specified in the corresponding element of NumWiresPerGrp.
0713 A dead region (or where there are no wires) is specified by a 0 in the appropriate position
0714 in NumGroups, and the corresponding element in NumWiresPerGrp contains the number of 'virtual'
0715 wires to define the extent of the dead region.
0716
0717 e.g. ME41: 31 groups of 5 wires, 1 group of 2, dead region of 6, etc.
0718 -->
0719 <Parameter name="WireSpacing" value="3.11945*mm"/>
0720 <Parameter name="AlignmentPinToFirstWire" value="30.4*mm"/>
0721 <Parameter name="LengthOfFirstWire" value="690.1*mm"/>
0722 <Parameter name="LengthOfLastWire" value="1256.5*mm"/>
0723 <Parameter name="RadialExtentOfWirePlane" value="1497.3*mm"/>
0724 <Parameter name="TotNumWireGroups" value="96"/>
0725 <Parameter name="NumGroups" value="31"/>
0726 <Parameter name="NumGroups" value="1"/>
0727 <Parameter name="NumGroups" value="0"/>
0728 <Parameter name="NumGroups" value="1"/>
0729 <Parameter name="NumGroups" value="30"/>
0730 <Parameter name="NumGroups" value="1"/>
0731 <Parameter name="NumGroups" value="0"/>
0732 <Parameter name="NumGroups" value="1"/>
0733 <Parameter name="NumGroups" value="30"/>
0734 <Parameter name="NumGroups" value="1"/>
0735 <Parameter name="NumWiresPerGrp" value="5"/>
0736 <Parameter name="NumWiresPerGrp" value="2"/>
0737 <Parameter name="NumWiresPerGrp" value="6"/>
0738 <Parameter name="NumWiresPerGrp" value="2"/>
0739 <Parameter name="NumWiresPerGrp" value="5"/>
0740 <Parameter name="NumWiresPerGrp" value="2"/>
0741 <Parameter name="NumWiresPerGrp" value="6"/>
0742 <Parameter name="NumWiresPerGrp" value="2"/>
0743 <Parameter name="NumWiresPerGrp" value="5"/>
0744 <Parameter name="NumWiresPerGrp" value="6"/>
0745 </SpecPar>
0746 <!--# ========================================================-->
0747 <!--# Parameters for Cathode Strip Chambers: ME22AlumFrame -->
0748 <!--# ========================================================-->
0749 <SpecPar name="ChamberSpecs_ME22">
0750 <PartSelector path="//ME22AlumFrame"/>
0751 <Parameter name="upar" value="0.03"/>
0752 <!--# 0 - strip resolution-->
0753 <Parameter name="upar" value="1.4722"/>
0754 <!--# 1 - wire resolution-->
0755 <Parameter name="upar" value="1"/>
0756 <!--# 2 - efficiency-->
0757 <Parameter name="upar" value="10"/>
0758 <!--# 3 - time window (bx)-->
0759 <Parameter name="upar" value="0.00"/>
0760 <!--# 4 - neutron hit rate per CSC layer per event-->
0761 <Parameter name="upar" value="80"/>
0762 <!--# 5 - number of strips in each layer of chamber-->
0763 <Parameter name="upar" value="2"/>
0764 <!--# 6 - number of strips 2*nnodes+1 around hit-->
0765 <Parameter name="upar" value="16"/>
0766 <!--# 7 - No. of wires in group-->
0767 <Parameter name="upar" value="0."/>
0768 <!--# 8 - No. of floating strips-->
0769 <Parameter name="upar" value="0.47625"/>
0770 <!--# 9 - "h" - Anode - Cathode spacing-->
0771 <Parameter name="upar" value="1.330"/>
0772 <!--# 10 - gas gain-->
0773 <Parameter name="upar" value="4000"/>
0774 <!--# 11 - CSC Voltage-->
0775 <Parameter name="upar" value="0.00000E+00"/>
0776 <!--# 12 - tilt angle for CSC wire slope (+z)-->
0777 <Parameter name="upar" value="0.01"/>
0778 <!--# 13 - calibration error-->
0779 <Parameter name="upar" value="0.5"/>
0780 <!--# 14 - e- attraction in gas-->
0781 <Parameter name="upar" value="0.0779"/>
0782 <!--# 15 - f_ind = 0.41 * f_sh = 0.19-->
0783 <Parameter name="upar" value="0.5"/>
0784 <!--# 16 - ADC count (fC)-->
0785 <Parameter name="upar" value="0.0025"/>
0786 <!--# 17 - Anode wire radius-->
0787 <Parameter name="upar" value="50"/>
0788 <!--# 18 - Fast shaper peaking time (ns)-->
0789 <Parameter name="upar" value="120"/>
0790 <!--# 19 - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0791 <!--# 20 & 21 - strip offset in strip widths (alternate layers)-->
0792 <Parameter name="upar" value="-0.25"/>
0793 <Parameter name="upar" value="0.25"/>
0794 <!--# 22 & 23 - (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0795 <Parameter name="upar" value="700"/>
0796 <Parameter name="upar" value="25"/>
0797 <!--# 24 - global nominal radial position of alignment pin (cm) -->
0798 <Parameter name="upar" value="360.99"/>
0799 <!--# 25 - distance from bottom edge of frame to alignment pin (cm) -->
0800 <Parameter name="upar" value="3.49"/>
0801 <!--# 26 - length of chamber from outer edges of frame (cm) -->
0802 <Parameter name="upar" value="338.0"/>
0803 <!--# 27 - distance from end of strip to alignment pin (cm) -->
0804 <Parameter name="upar" value="3.03"/>
0805 <!--# 28 - length of (sensitive region of) strip along local y axis (cm) -->
0806 <Parameter name="upar" value="323.06"/>
0807 <!--# 29 - strip deltaPhi (mrad) -->
0808 <Parameter name="upar" value="2.327105"/>
0809 <!--# 30 - ctiOffset - possible future use -->
0810 <Parameter name="upar" value="0.0"/>
0811 <!--# 31 - chamber frame thickness (mm) -->
0812 <Parameter name="upar" value="6.096"/>
0813 <!--# 32 - gas gap thickness (mm) -->
0814 <Parameter name="upar" value="9.525"/>
0815 <!--# 33 - panel thickness (mm) -->
0816 <Parameter name="upar" value="15.875"/>
0817 <!--# 34 - zlocal offset between AF and average AGV centre (mm) -->
0818 <Parameter name="upar" value="-1.71"/>
0819 <!-- Wire group specs.
0820 The wire grouping is specified by two vectors NumGroups and NumWiresPerGrp, of the same length.
0821 The elements of NumGroups specify the number of consecutive groups of wires of a specific size,
0822 with this size (i.e. number of wires) specified in the corresponding element of NumWiresPerGrp.
0823 A dead region (or where there are no wires) is specified by a 0 in the appropriate position
0824 in NumGroups, and the corresponding element in NumWiresPerGrp contains the number of 'virtual'
0825 wires to define the extent of the dead region.
0826
0827 e.g. ME22: 15 groups of 16 wires, 1 group of 13, dead region of 6, etc.
0828 -->
0829 <Parameter name="WireSpacing" value="3.16108*mm"/>
0830 <Parameter name="AlignmentPinToFirstWire" value="28.7*mm"/>
0831 <Parameter name="LengthOfFirstWire" value="664.6*mm"/>
0832 <Parameter name="LengthOfLastWire" value="1271.5*mm"/>
0833 <Parameter name="RadialExtentOfWirePlane" value="3233.8*mm"/>
0834 <Parameter name="TotNumWireGroups" value="64"/>
0835 <Parameter name="NumGroups" value="15"/>
0836 <Parameter name="NumGroups" value="1"/>
0837 <Parameter name="NumGroups" value="0"/>
0838 <Parameter name="NumGroups" value="1"/>
0839 <Parameter name="NumGroups" value="10"/>
0840 <Parameter name="NumGroups" value="1"/>
0841 <Parameter name="NumGroups" value="0"/>
0842 <Parameter name="NumGroups" value="1"/>
0843 <Parameter name="NumGroups" value="10"/>
0844 <Parameter name="NumGroups" value="1"/>
0845 <Parameter name="NumGroups" value="0"/>
0846 <Parameter name="NumGroups" value="1"/>
0847 <Parameter name="NumGroups" value="10"/>
0848 <Parameter name="NumGroups" value="1"/>
0849 <Parameter name="NumGroups" value="0"/>
0850 <Parameter name="NumGroups" value="1"/>
0851 <Parameter name="NumGroups" value="11"/>
0852 <Parameter name="NumWiresPerGrp" value="16"/>
0853 <Parameter name="NumWiresPerGrp" value="13"/>
0854 <Parameter name="NumWiresPerGrp" value="6"/>
0855 <Parameter name="NumWiresPerGrp" value="13"/>
0856 <Parameter name="NumWiresPerGrp" value="16"/>
0857 <Parameter name="NumWiresPerGrp" value="13"/>
0858 <Parameter name="NumWiresPerGrp" value="6"/>
0859 <Parameter name="NumWiresPerGrp" value="13"/>
0860 <Parameter name="NumWiresPerGrp" value="16"/>
0861 <Parameter name="NumWiresPerGrp" value="13"/>
0862 <Parameter name="NumWiresPerGrp" value="6"/>
0863 <Parameter name="NumWiresPerGrp" value="13"/>
0864 <Parameter name="NumWiresPerGrp" value="16"/>
0865 <Parameter name="NumWiresPerGrp" value="13"/>
0866 <Parameter name="NumWiresPerGrp" value="6"/>
0867 <Parameter name="NumWiresPerGrp" value="13"/>
0868 <Parameter name="NumWiresPerGrp" value="16"/>
0869 </SpecPar>
0870 <!--# ========================================================-->
0871 <!--# Parameters for Cathode Strip Chambers: ME32AlumFrame -->
0872 <!--# ========================================================-->
0873 <SpecPar name="ChamberSpecs_ME32">
0874 <PartSelector path="//ME32AlumFrame"/>
0875 <Parameter name="upar" value="0.03"/>
0876 <!--# 0 - strip resolution-->
0877 <Parameter name="upar" value="1.4722"/>
0878 <!--# 1 - wire resolution-->
0879 <Parameter name="upar" value="1"/>
0880 <!--# 2 - efficiency-->
0881 <Parameter name="upar" value="10"/>
0882 <!--# 3 - time window (bx)-->
0883 <Parameter name="upar" value="0.00"/>
0884 <!--# 4 - neutron hit rate per CSC layer per event-->
0885 <Parameter name="upar" value="80"/>
0886 <!--# 5 - number of strips in each layer of chamber-->
0887 <Parameter name="upar" value="2"/>
0888 <!--# 6 - number of strips 2*nnodes+1 around hit-->
0889 <Parameter name="upar" value="16"/>
0890 <!--# 7 - No. of wires in group-->
0891 <Parameter name="upar" value="0."/>
0892 <!--# 8 - No. of floating strips-->
0893 <Parameter name="upar" value="0.47625"/>
0894 <!--# 9 - "h" - Anode - Cathode spacing-->
0895 <Parameter name="upar" value="1.33"/>
0896 <!--# 10 - gas gain-->
0897 <Parameter name="upar" value="4000"/>
0898 <!--# 11 - CSC Voltage-->
0899 <Parameter name="upar" value="0.00000E+00"/>
0900 <!--# 12 - tilt angle for CSC wire slope (+z)-->
0901 <Parameter name="upar" value="0.01"/>
0902 <!--# 13 - calibration error-->
0903 <Parameter name="upar" value="0.5"/>
0904 <!--# 14 - e- attraction in gas-->
0905 <Parameter name="upar" value="0.0779"/>
0906 <!--# 15 - f_ind = 0.41 * f_sh = 0.19-->
0907 <Parameter name="upar" value="0.5"/>
0908 <!--# 16 - ADC count (fC)-->
0909 <Parameter name="upar" value="0.0025"/>
0910 <!--# 17 - Anode wire radius-->
0911 <Parameter name="upar" value="50"/>
0912 <!--# 18 - Fast shaper peaking time (ns)-->
0913 <Parameter name="upar" value="120"/>
0914 <!--# 19 - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0915 <!--# 20 & 21 - strip offset in strip widths (alternate layers)-->
0916 <Parameter name="upar" value="-0.25"/>
0917 <Parameter name="upar" value="0.25"/>
0918 <!--# 22 & 23 - (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0919 <Parameter name="upar" value="700"/>
0920 <Parameter name="upar" value="25"/>
0921 <!--# 24 - global nominal radial position of alignment pin (cm) -->
0922 <Parameter name="upar" value="360.99"/>
0923 <!--# 25 - distance from bottom edge of frame to alignment pin (cm) -->
0924 <Parameter name="upar" value="3.49"/>
0925 <!--# 26 - length of chamber from outer edges of frame (cm) -->
0926 <Parameter name="upar" value="338.0"/>
0927 <!--# 27 - distance from end of strip to alignment pin (cm) -->
0928 <Parameter name="upar" value="3.03"/>
0929 <!--# 28 - length of (sensitive region of) strip along local y axis (cm) -->
0930 <Parameter name="upar" value="323.06"/>
0931 <!--# 29 - strip deltaPhi (mrad) -->
0932 <Parameter name="upar" value="2.327105"/>
0933 <!--# 30 - ctiOffset - possible future use -->
0934 <Parameter name="upar" value="0.0"/>
0935 <!--# 31 - chamber frame thickness (mm) -->
0936 <Parameter name="upar" value="6.096"/>
0937 <!--# 32 - gas gap thickness (mm) -->
0938 <Parameter name="upar" value="9.525"/>
0939 <!--# 33 - panel thickness (mm) -->
0940 <Parameter name="upar" value="15.875"/>
0941 <!--# 34 - zlocal offset between AF and average AGV centre (mm) -->
0942 <Parameter name="upar" value="1.71"/>
0943 <!-- Wire group specs.
0944 The wire grouping is specified by two vectors NumGroups and NumWiresPerGrp, of the same length.
0945 The elements of NumGroups specify the number of consecutive groups of wires of a specific size,
0946 with this size (i.e. number of wires) specified in the corresponding element of NumWiresPerGrp.
0947 A dead region (or where there are no wires) is specified by a 0 in the appropriate position
0948 in NumGroups, and the corresponding element in NumWiresPerGrp contains the number of 'virtual'
0949 wires to define the extent of the dead region.
0950
0951 e.g. ME32: 15 groups of 16 wires, 1 group of 13, dead region of 6 wire-spacings, etc.
0952 -->
0953 <Parameter name="WireSpacing" value="3.16108*mm"/>
0954 <Parameter name="AlignmentPinToFirstWire" value="28.7*mm"/>
0955 <Parameter name="LengthOfFirstWire" value="664.6*mm"/>
0956 <Parameter name="LengthOfLastWire" value="1271.5*mm"/>
0957 <Parameter name="RadialExtentOfWirePlane" value="3233.8*mm"/>
0958 <Parameter name="TotNumWireGroups" value="64"/>
0959 <Parameter name="NumGroups" value="15"/>
0960 <Parameter name="NumGroups" value="1"/>
0961 <Parameter name="NumGroups" value="0"/>
0962 <Parameter name="NumGroups" value="1"/>
0963 <Parameter name="NumGroups" value="10"/>
0964 <Parameter name="NumGroups" value="1"/>
0965 <Parameter name="NumGroups" value="0"/>
0966 <Parameter name="NumGroups" value="1"/>
0967 <Parameter name="NumGroups" value="10"/>
0968 <Parameter name="NumGroups" value="1"/>
0969 <Parameter name="NumGroups" value="0"/>
0970 <Parameter name="NumGroups" value="1"/>
0971 <Parameter name="NumGroups" value="10"/>
0972 <Parameter name="NumGroups" value="1"/>
0973 <Parameter name="NumGroups" value="0"/>
0974 <Parameter name="NumGroups" value="1"/>
0975 <Parameter name="NumGroups" value="11"/>
0976 <Parameter name="NumWiresPerGrp" value="16"/>
0977 <Parameter name="NumWiresPerGrp" value="13"/>
0978 <Parameter name="NumWiresPerGrp" value="6"/>
0979 <Parameter name="NumWiresPerGrp" value="13"/>
0980 <Parameter name="NumWiresPerGrp" value="16"/>
0981 <Parameter name="NumWiresPerGrp" value="13"/>
0982 <Parameter name="NumWiresPerGrp" value="6"/>
0983 <Parameter name="NumWiresPerGrp" value="13"/>
0984 <Parameter name="NumWiresPerGrp" value="16"/>
0985 <Parameter name="NumWiresPerGrp" value="13"/>
0986 <Parameter name="NumWiresPerGrp" value="6"/>
0987 <Parameter name="NumWiresPerGrp" value="13"/>
0988 <Parameter name="NumWiresPerGrp" value="16"/>
0989 <Parameter name="NumWiresPerGrp" value="13"/>
0990 <Parameter name="NumWiresPerGrp" value="6"/>
0991 <Parameter name="NumWiresPerGrp" value="13"/>
0992 <Parameter name="NumWiresPerGrp" value="16"/>
0993 </SpecPar>
0994 <!--# ========================================================-->
0995 <!--# Parameters for Cathode Strip Chambers: ME42AlumFrame -->
0996 <!--# ========================================================-->
0997 <SpecPar name="ChamberSpecs_ME42">
0998 <PartSelector path="//ME42AlumFrame"/>
0999 <Parameter name="upar" value="0.03"/>
1000 <!--# 0 - strip resolution-->
1001 <Parameter name="upar" value="1.4722"/>
1002 <!--# 1 - wire resolution-->
1003 <Parameter name="upar" value="1"/>
1004 <!--# 2 - efficiency-->
1005 <Parameter name="upar" value="10"/>
1006 <!--# 3 - time window (bx)-->
1007 <Parameter name="upar" value="0.00"/>
1008 <!--# 4 - neutron hit rate per CSC layer per event-->
1009 <Parameter name="upar" value="80"/>
1010 <!--# 5 - number of strips in each layer of chamber-->
1011 <Parameter name="upar" value="2"/>
1012 <!--# 6 - number of strips 2*nnodes+1 around hit-->
1013 <Parameter name="upar" value="16"/>
1014 <!--# 7 - No. of wires in group-->
1015 <Parameter name="upar" value="0."/>
1016 <!--# 8 - No. of floating strips-->
1017 <Parameter name="upar" value="0.47625"/>
1018 <!--# 9 - "h" - Anode - Cathode spacing-->
1019 <Parameter name="upar" value="1.33"/>
1020 <!--# 10 - gas gain-->
1021 <Parameter name="upar" value="4000"/>
1022 <!--# 11 - CSC Voltage-->
1023 <Parameter name="upar" value="0.00000E+00"/>
1024 <!--# 12 - tilt angle for CSC wire slope (+z)-->
1025 <Parameter name="upar" value="0.01"/>
1026 <!--# 13 - calibration error-->
1027 <Parameter name="upar" value="0.5"/>
1028 <!--# 14 - e- attraction in gas-->
1029 <Parameter name="upar" value="0.0779"/>
1030 <!--# 15 - f_ind = 0.41 * f_sh = 0.19-->
1031 <Parameter name="upar" value="0.5"/>
1032 <!--# 16 - ADC count (fC)-->
1033 <Parameter name="upar" value="0.0025"/>
1034 <!--# 17 - Anode wire radius-->
1035 <Parameter name="upar" value="50"/>
1036 <!--# 18 - Fast shaper peaking time (ns)-->
1037 <Parameter name="upar" value="120"/>
1038 <!--# 19 - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
1039 <!--# 20 & 21 - strip offset in strip widths (alternate layers)-->
1040 <Parameter name="upar" value="-0.25"/>
1041 <Parameter name="upar" value="0.25"/>
1042 <!--# 22 & 23 - (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
1043 <Parameter name="upar" value="700"/>
1044 <Parameter name="upar" value="25"/>
1045 <!--# 24 - global nominal radial position of alignment pin (cm) -->
1046 <Parameter name="upar" value="360.99"/>
1047 <!--# 25 - distance from bottom edge of frame to alignment pin (cm) -->
1048 <Parameter name="upar" value="3.49"/>
1049 <!--# 26 - length of chamber from outer edges of frame (cm) -->
1050 <Parameter name="upar" value="338.0"/>
1051 <!--# 27 - distance from end of strip to alignment pin (cm) -->
1052 <Parameter name="upar" value="3.03"/>
1053 <!--# 28 - length of (sensitive region of) strip along local y axis (cm) -->
1054 <Parameter name="upar" value="323.06"/>
1055 <!--# 29 - strip deltaPhi (mrad) -->
1056 <Parameter name="upar" value="2.327105"/>
1057 <!--# 30 - ctiOffset - possible future use -->
1058 <Parameter name="upar" value="0.0"/>
1059 <!--# 31 - chamber frame thickness (mm) -->
1060 <Parameter name="upar" value="6.096"/>
1061 <!--# 32 - gas gap thickness (mm) -->
1062 <Parameter name="upar" value="9.525"/>
1063 <!--# 33 - panel thickness (mm) -->
1064 <Parameter name="upar" value="15.875"/>
1065 <!--# 34 - zlocal offset between AF and average AGV centre (mm) -->
1066 <Parameter name="upar" value="1.71"/>
1067 <!-- Wire group specs.
1068 The wire grouping is specified by two vectors NumGroups and NumWiresPerGrp, of the same length.
1069 The elements of NumGroups specify the number of consecutive groups of wires of a specific size,
1070 with this size (i.e. number of wires) specified in the corresponding element of NumWiresPerGrp.
1071 A dead region (or where there are no wires) is specified by a 0 in the appropriate position
1072 in NumGroups, and the corresponding element in NumWiresPerGrp contains the number of 'virtual'
1073 wires to define the extent of the dead region.
1074
1075 e.g. ME42: 15 groups of 16 wires, 1 group of 13, dead region of 6 wire-spacings, etc.
1076 -->
1077 <Parameter name="WireSpacing" value="3.16108*mm"/>
1078 <Parameter name="AlignmentPinToFirstWire" value="28.7*mm"/>
1079 <Parameter name="LengthOfFirstWire" value="664.6*mm"/>
1080 <Parameter name="LengthOfLastWire" value="1271.5*mm"/>
1081 <Parameter name="RadialExtentOfWirePlane" value="3233.8*mm"/>
1082 <Parameter name="TotNumWireGroups" value="64"/>
1083 <Parameter name="NumGroups" value="15"/>
1084 <Parameter name="NumGroups" value="1"/>
1085 <Parameter name="NumGroups" value="0"/>
1086 <Parameter name="NumGroups" value="1"/>
1087 <Parameter name="NumGroups" value="10"/>
1088 <Parameter name="NumGroups" value="1"/>
1089 <Parameter name="NumGroups" value="0"/>
1090 <Parameter name="NumGroups" value="1"/>
1091 <Parameter name="NumGroups" value="10"/>
1092 <Parameter name="NumGroups" value="1"/>
1093 <Parameter name="NumGroups" value="0"/>
1094 <Parameter name="NumGroups" value="1"/>
1095 <Parameter name="NumGroups" value="10"/>
1096 <Parameter name="NumGroups" value="1"/>
1097 <Parameter name="NumGroups" value="0"/>
1098 <Parameter name="NumGroups" value="1"/>
1099 <Parameter name="NumGroups" value="11"/>
1100 <Parameter name="NumWiresPerGrp" value="16"/>
1101 <Parameter name="NumWiresPerGrp" value="13"/>
1102 <Parameter name="NumWiresPerGrp" value="6"/>
1103 <Parameter name="NumWiresPerGrp" value="13"/>
1104 <Parameter name="NumWiresPerGrp" value="16"/>
1105 <Parameter name="NumWiresPerGrp" value="13"/>
1106 <Parameter name="NumWiresPerGrp" value="6"/>
1107 <Parameter name="NumWiresPerGrp" value="13"/>
1108 <Parameter name="NumWiresPerGrp" value="16"/>
1109 <Parameter name="NumWiresPerGrp" value="13"/>
1110 <Parameter name="NumWiresPerGrp" value="6"/>
1111 <Parameter name="NumWiresPerGrp" value="13"/>
1112 <Parameter name="NumWiresPerGrp" value="16"/>
1113 <Parameter name="NumWiresPerGrp" value="13"/>
1114 <Parameter name="NumWiresPerGrp" value="6"/>
1115 <Parameter name="NumWiresPerGrp" value="13"/>
1116 <Parameter name="NumWiresPerGrp" value="16"/>
1117 </SpecPar>
1118 </SpecParSection>
1119 </DDDefinition>
