Warning, /Geometry/CSCGeometryBuilder/data/cscSpecsOldOrca.xml is written in an unsupported language. File is not indexed.
0001 <?xml version="1.0" encoding="UTF-8"?>
0002 <SpecParSection xmlns="http://www.cern.ch/cms/DDL" label="Try1" eval="true">
0003 <!--#. p o r t e d f r o m ORCA/Data/MuonData/EndcapData Tim Cox -->
0004 <!--#. This version approximates default in ORCA i.e. simplified wire geom -->
0005 <!--#. This file _is_ MuEndOrcaSpec.xml updated in labelling only. -->
0006 <!--#. ========================================================-->
0007 <!--#. Parameters for Cathode Strip Chambers: ME1A_ActiveGasVol-->
0008 <!--#. ========================================================-->
0009 <SpecPar name="MCFX1">
0010 <PartSelector path="//ME1A_ActiveGasVol"/>
0011 <Parameter name="upar" value="0.015"/>
0012 <!--#. SGCSCY - strip resolution-->
0013 <Parameter name="upar" value="1.08"/>
0014 <!--#. SGCSCZ - wire resolution-->
0015 <Parameter name="upar" value="1.58771"/>
0016 <!--#. Efficiency-->
0017 <Parameter name="upar" value="10"/>
0018 <!--#. time window (bx)-->
0019 <Parameter name="upar" value="0.00"/>
0020 <!--#. neutron hit rate per CSC layer per event-->
0021 <Parameter name="upar" value="24"/>
0022 <!--#. NSTRIP - number of strips in one chamber-1/2-->
0023 <Parameter name="upar" value="2"/>
0024 <!--#. NNODES - number of strips 2*nnodes+1 around hit-->
0025 <Parameter name="upar" value="11"/>
0026 <!--#. Nowgrp - No. of wires in group-->
0027 <Parameter name="upar" value="1"/>
0028 <!--#. NOFLOA - No. of floating strips-->
0029 <Parameter name="upar" value="0.25"/>
0030 <!--#. D_ANOD - Anods Step-->
0031 <Parameter name="upar" value="0.25"/>
0032 <!--#. D_ACAT "h" - Anode - Cathode spacing-->
0033 <Parameter name="upar" value="2.50"/>
0034 <!--#. GASGain - gas gain-->
0035 <Parameter name="upar" value="2800"/>
0036 <!--#. VOLTAGE - CSC Voltage-->
0037 <Parameter name="upar" value="29"/>
0038 <!--#. PHI_TILT - tilt angle for CSC wire slope (+z)-->
0039 <Parameter name="upar" value="0.01"/>
0040 <!--#. RMScal - calibration ambiguity-->
0041 <Parameter name="upar" value="0.00000"/>
0042 <!--#. F_att - e- attraction in gas-->
0043 <Parameter name="upar" value="0.12"/>
0044 <!--#. Fracqs - f_ind = 0.4 * f_sh = 0.3-->
0045 <Parameter name="upar" value="0.5"/>
0046 <!--#. ADCoun - ADC count (fC)-->
0047 <Parameter name="upar" value="0.0015"/>
0048 <!--#. RADWIR - Anode wire radius-->
0049 <Parameter name="upar" value="30"/>
0050 <!--#. TGSTIM - Fast shaper peaking time (ns)-->
0051 <Parameter name="upar" value="80"/>
0052 <!--#. TIMEPS - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0053 <Parameter name="upar" value="595.45"/>
0054 <!--#. AVGZPS - Average z-position for field integrals-->
0055 <Parameter name="upar" value="16"/>
0056 <Parameter name="upar" value="0.9"/>
0057 <Parameter name="upar" value="2.4"/>
0058 <!--#. NBINS ETAMIN ETAMAX - Numb. of points and eta range used for field interals-->
0059 <Parameter name="upar" value="-3.00035"/>
0060 <Parameter name="upar" value="-3.04061"/>
0061 <Parameter name="upar" value="-3.18716"/>
0062 <Parameter name="upar" value="-3.24078"/>
0063 <Parameter name="upar" value="-3.22628"/>
0064 <Parameter name="upar" value="-3.1543"/>
0065 <Parameter name="upar" value="-2.8861"/>
0066 <Parameter name="upar" value="-2.59695"/>
0067 <Parameter name="upar" value="-2.33858"/>
0068 <Parameter name="upar" value="-2.07817"/>
0069 <Parameter name="upar" value="-1.89057"/>
0070 <Parameter name="upar" value="-1.68819"/>
0071 <Parameter name="upar" value="-1.52525"/>
0072 <Parameter name="upar" value="-1.36786"/>
0073 <Parameter name="upar" value="-1.21703"/>
0074 <Parameter name="upar" value="-1.08225"/>
0075 <!--#. BDLSQR - List of integral BdL^2 over eta range at AVGZPS-->
0076 <Parameter name="upar" value="-1463.24"/>
0077 <Parameter name="upar" value="-1202.94"/>
0078 <Parameter name="upar" value="-1011.84"/>
0079 <Parameter name="upar" value="-838.975"/>
0080 <Parameter name="upar" value="-697.798"/>
0081 <Parameter name="upar" value="-541.37"/>
0082 <Parameter name="upar" value="-446.088"/>
0083 <Parameter name="upar" value="-358.988"/>
0084 <Parameter name="upar" value="-289.739"/>
0085 <Parameter name="upar" value="-228.961"/>
0086 <Parameter name="upar" value="-190.502"/>
0087 <Parameter name="upar" value="-153.135"/>
0088 <Parameter name="upar" value="-126.294"/>
0089 <Parameter name="upar" value="-102.825"/>
0090 <Parameter name="upar" value="-82.6679"/>
0091 <Parameter name="upar" value="-66.3538"/>
0092 <!--#. AMSANG - List of average MS angles over eta range at AVGZPS-->
0093 <Parameter name="upar" value="0.0435951"/>
0094 <Parameter name="upar" value="0.0359749"/>
0095 <Parameter name="upar" value="0.0293529"/>
0096 <Parameter name="upar" value="0.0307668"/>
0097 <Parameter name="upar" value="0.0300841"/>
0098 <Parameter name="upar" value="0.0256645"/>
0099 <Parameter name="upar" value="0.026135"/>
0100 <Parameter name="upar" value="0.0213164"/>
0101 <Parameter name="upar" value="0.0220813"/>
0102 <Parameter name="upar" value="0.0283125"/>
0103 <Parameter name="upar" value="0.0285508"/>
0104 <Parameter name="upar" value="0.0281912"/>
0105 <Parameter name="upar" value="0.0281849"/>
0106 <Parameter name="upar" value="0.0280504"/>
0107 <Parameter name="upar" value="0.0278029"/>
0108 <Parameter name="upar" value="0.0278952"/>
0109 <!--#. strip and wire shifts, electronics noise-->
0110 <Parameter name="upar" value=".0"/>
0111 <Parameter name="upar" value=".0"/>
0112 <Parameter name="upar" value=".0"/>
0113 <Parameter name="upar" value=".0"/>
0114 <Parameter name="upar" value=".0"/>
0115 <Parameter name="upar" value=".0"/>
0116 <!--#. strip staggering-->
0117 <Parameter name="upar" value=".0"/>
0118 <Parameter name="upar" value=".0"/>
0119 <Parameter name="upar" value=".0"/>
0120 <Parameter name="upar" value=".0"/>
0121 <Parameter name="upar" value=".0"/>
0122 <Parameter name="upar" value=".0"/>
0123 <!--#. wires-->
0124 <Parameter name="upar" value="700"/>
0125 <Parameter name="upar" value="25"/>
0126 <!--#. (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0127 <Parameter name="upar" value="20"/>
0128 <!--#. Threshold for trigger-->
0129 <!-- NEW SpecPars for wire grouping. The idea (as per Tim Cox) is to
0130 use the concept of virtual wires. The main thing to note is that there
0131 are two vectors below which correspond to the number of groups that have
0132 that number of wires per group, and that 0 number of groups indicates no
0133 groups (i.e. dead space) and it covers 6 (for example) virtual wires.
0134
0135 Version to match old ORCA-internal wire geometry (ptc 25-Apr-05)
0136 -->
0137 <Parameter name="WireSpacing" value="2.5*mm"/>
0138 <Parameter name="CenterPinToFirstWire" value="28.5*mm"/>
0139 <Parameter name="TotNumWireGroups" value="17"/>
0140 <Parameter name="NumGroups" value="16"/>
0141 <Parameter name="NumGroups" value="1"/>
0142 <Parameter name="NumWiresPerGrp" value="11"/>
0143 <Parameter name="NumWiresPerGrp" value="19"/>
0144 </SpecPar>
0145 <!-- #. =========================================================== -->
0146 <!-- #. Parameters for Cathode Strip Chambers: ME11_ActiveGasVol -->
0147 <!-- #. =========================================================== -->
0148 <SpecPar name="MCFX2">
0149 <PartSelector path="//ME11_ActiveGasVol"/>
0150 <Parameter name="upar" value="0.015"/>
0151 <!--#. SGCSCY - strip resolution-->
0152 <Parameter name="upar" value="1.08"/>
0153 <!--#. SGCSCZ - wire resolution-->
0154 <Parameter name="upar" value="1"/>
0155 <!--#. Efficiency-->
0156 <Parameter name="upar" value="10"/>
0157 <!--#. time window (bx)-->
0158 <Parameter name="upar" value="0.00"/>
0159 <!--#. neutron hit rate per CSC layer per event-->
0160 <Parameter name="upar" value="32"/>
0161 <!--#. NSTRIP - number of strips in one chamber-1/2-->
0162 <Parameter name="upar" value="2"/>
0163 <!--#. NNODES - number of strips 2*nnodes+1 around hit-->
0164 <Parameter name="upar" value="11"/>
0165 <!--#. Nowgrp - No. of wires in group-->
0166 <Parameter name="upar" value="1"/>
0167 <!--#. NOFLOA - No. of floating strips-->
0168 <Parameter name="upar" value="0.25"/>
0169 <!--#. D_ANOD - Anods Step-->
0170 <Parameter name="upar" value="0.25"/>
0171 <!--#. D_ACAT "h" - Anode - Cathode spacing-->
0172 <Parameter name="upar" value="6.00"/>
0173 <!--#. GASGain - gas gain-->
0174 <Parameter name="upar" value="2800"/>
0175 <!--#. VOLTAGE - CSC Voltage-->
0176 <Parameter name="upar" value="29"/>
0177 <!--#. PHI_TILT - tilt angle for CSC wire slope (+z)-->
0178 <Parameter name="upar" value="0.01"/>
0179 <!--#. RMScal - calibration ambiguity-->
0180 <Parameter name="upar" value="0.00000"/>
0181 <!--#. F_att - e- attraction in gas-->
0182 <Parameter name="upar" value="0.12"/>
0183 <!--#. Fracqs - f_ind = 0.4 * f_sh = 0.3-->
0184 <Parameter name="upar" value="0.125"/>
0185 <!--#. ADCoun - ADC count (fC) (KATOD gain 4mV/fC; ADC 1 cnt/.5mV)-->
0186 <Parameter name="upar" value="0.0015"/>
0187 <!--#. RADWIR - Anode wire radius-->
0188 <Parameter name="upar" value="30"/>
0189 <!--#. TGSTIM - Fast shaper peaking time (ns)-->
0190 <Parameter name="upar" value="120"/>
0191 <!--#. TIMEPS - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0192 <Parameter name="upar" value="595.45"/>
0193 <!--#. AVGZPS - Average z-position for field integrals-->
0194 <Parameter name="upar" value="16"/>
0195 <Parameter name="upar" value="0.9"/>
0196 <Parameter name="upar" value="2.4"/>
0197 <!--#. NBINS ETAMIN ETAMAX - Numb. of points and eta range used for field interals-->
0198 <Parameter name="upar" value="-3.00035"/>
0199 <Parameter name="upar" value="-3.04061"/>
0200 <Parameter name="upar" value="-3.18716"/>
0201 <Parameter name="upar" value="-3.24078"/>
0202 <Parameter name="upar" value="-3.22628"/>
0203 <Parameter name="upar" value="-3.1543"/>
0204 <Parameter name="upar" value="-2.8861"/>
0205 <Parameter name="upar" value="-2.59695"/>
0206 <Parameter name="upar" value="-2.33858"/>
0207 <Parameter name="upar" value="-2.07817"/>
0208 <Parameter name="upar" value="-1.89057"/>
0209 <Parameter name="upar" value="-1.68819"/>
0210 <Parameter name="upar" value="-1.52525"/>
0211 <Parameter name="upar" value="-1.36786"/>
0212 <Parameter name="upar" value="-1.21703"/>
0213 <Parameter name="upar" value="-1.08225"/>
0214 <!--#. BDLSQR - List of integral BdL^2 over eta range at AVGZPS-->
0215 <Parameter name="upar" value="-1463.24"/>
0216 <Parameter name="upar" value="-1202.94"/>
0217 <Parameter name="upar" value="-1011.84"/>
0218 <Parameter name="upar" value="-838.975"/>
0219 <Parameter name="upar" value="-697.798"/>
0220 <Parameter name="upar" value="-541.37"/>
0221 <Parameter name="upar" value="-446.088"/>
0222 <Parameter name="upar" value="-358.988"/>
0223 <Parameter name="upar" value="-289.739"/>
0224 <Parameter name="upar" value="-228.961"/>
0225 <Parameter name="upar" value="-190.502"/>
0226 <Parameter name="upar" value="-153.135"/>
0227 <Parameter name="upar" value="-126.294"/>
0228 <Parameter name="upar" value="-102.825"/>
0229 <Parameter name="upar" value="-82.6679"/>
0230 <Parameter name="upar" value="-66.3538"/>
0231 <!--#. AMSANG - List of average MS angles over eta range at AVGZPS-->
0232 <Parameter name="upar" value="0.0435951"/>
0233 <Parameter name="upar" value="0.0359749"/>
0234 <Parameter name="upar" value="0.0293529"/>
0235 <Parameter name="upar" value="0.0307668"/>
0236 <Parameter name="upar" value="0.0300841"/>
0237 <Parameter name="upar" value="0.0256645"/>
0238 <Parameter name="upar" value="0.026135"/>
0239 <Parameter name="upar" value="0.0213164"/>
0240 <Parameter name="upar" value="0.0220813"/>
0241 <Parameter name="upar" value="0.0283125"/>
0242 <Parameter name="upar" value="0.0285508"/>
0243 <Parameter name="upar" value="0.0281912"/>
0244 <Parameter name="upar" value="0.0281849"/>
0245 <Parameter name="upar" value="0.0280504"/>
0246 <Parameter name="upar" value="0.0278029"/>
0247 <Parameter name="upar" value="0.0278952"/>
0248 <!--#. strip and wire shifts, electronics noise-->
0249 <Parameter name="upar" value=".0"/>
0250 <Parameter name="upar" value=".0"/>
0251 <Parameter name="upar" value=".0"/>
0252 <Parameter name="upar" value=".0"/>
0253 <Parameter name="upar" value=".0"/>
0254 <Parameter name="upar" value=".0"/>
0255 <!--#. strip staggering-->
0256 <Parameter name="upar" value=".0"/>
0257 <Parameter name="upar" value=".0"/>
0258 <Parameter name="upar" value=".0"/>
0259 <Parameter name="upar" value=".0"/>
0260 <Parameter name="upar" value=".0"/>
0261 <Parameter name="upar" value=".0"/>
0262 <!--#. wires-->
0263 <Parameter name="upar" value="700"/>
0264 <Parameter name="upar" value="25"/>
0265 <!--#. (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0266 <Parameter name="upar" value="20"/>
0267 <!--#. Threshold for trigger-->
0268 <!-- NEW SpecPars for wire grouping. The idea (as per Tim Cox) is to
0269 use the concept of virtual wires. The main thing to note is that there
0270 are two vectors below which correspond to the number of groups that have
0271 that number of wires per group, and that 0 number of groups indicates no
0272 groups (i.e. dead space) and it covers 6 (for example) virtual wires.
0273
0274 Version to match old ORCA-internal wire geometry (ptc 25-Apr-05)
0275 -->
0276 <Parameter name="WireSpacing" value="2.5*mm"/>
0277 <Parameter name="CenterPinToFirstWire" value="28.5*mm"/>
0278 <Parameter name="TotNumWireGroups" value="39"/>
0279 <Parameter name="NumGroups" value="38"/>
0280 <Parameter name="NumGroups" value="1"/>
0281 <Parameter name="NumWiresPerGrp" value="11"/>
0282 <Parameter name="NumWiresPerGrp" value="20"/>
0283 </SpecPar>
0284 <!--#. ========================================================-->
0285 <!--#. Parameters for Cathode Strip Chambers: ME12_ActiveGasVol-->
0286 <!--#. ========================================================-->
0287 <SpecPar name="MCFX3">
0288 <PartSelector path="//ME12_ActiveGasVol"/>
0289 <Parameter name="upar" value="0.015"/>
0290 <!--#. SGCSCY - strip resolution-->
0291 <Parameter name="upar" value="0.9815"/>
0292 <!--#. SGCSCZ - wire resolution-->
0293 <Parameter name="upar" value="1"/>
0294 <!--#. Efficiency-->
0295 <Parameter name="upar" value="10"/>
0296 <!--#. time window (bx)-->
0297 <Parameter name="upar" value="0.00"/>
0298 <!--#. neutron hit rate per CSC layer per event-->
0299 <Parameter name="upar" value="40"/>
0300 <!--#. NSTRIP - number of strips in one chamber-1/2-->
0301 <Parameter name="upar" value="2"/>
0302 <!--#. NNODES - number of strips 2*nnodes+1 around hit-->
0303 <Parameter name="upar" value="11"/>
0304 <!--#. Nowgrp - No. of wires in group-->
0305 <Parameter name="upar" value="0."/>
0306 <!--#. NOFLOA - No. of floating strips-->
0307 <Parameter name="upar" value="0.316108"/>
0308 <!--#. D_ANOD - Wire spacing-->
0309 <Parameter name="upar" value="0.47625"/>
0310 <!--#. D_ACAT "h" - Anode - Cathode spacing-->
0311 <Parameter name="upar" value="8.88"/>
0312 <!--#. GASGain - gas gain-->
0313 <Parameter name="upar" value="4000"/>
0314 <!--#. VOLTAGE - CSC Voltage-->
0315 <Parameter name="upar" value="0.000"/>
0316 <!--#. PHI_TILT - tilt angle for CSC wire slope (+z)-->
0317 <Parameter name="upar" value="0.01"/>
0318 <!--#. RMScal - calibration ambiguity-->
0319 <Parameter name="upar" value="0.5"/>
0320 <!--#. F_att - e- attraction in gas-->
0321 <Parameter name="upar" value="0.0779"/>
0322 <!--#. Fracqs - f_ind = 0.41 * f_sh = 0.19-->
0323 <Parameter name="upar" value="0.5"/>
0324 <!--#. ADCoun - ADC count (fC)-->
0325 <Parameter name="upar" value="0.0025"/>
0326 <!--#. RADWIR - Anode wire radius-->
0327 <Parameter name="upar" value="50"/>
0328 <!--#. TGSTIM - Fast shaper peaking time (ns)-->
0329 <Parameter name="upar" value="120"/>
0330 <!--#. TIMEPS - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0331 <Parameter name="upar" value="695.5"/>
0332 <!--#. AVGZPS - Average z-position for field integrals-->
0333 <Parameter name="upar" value="16"/>
0334 <Parameter name="upar" value="0.9"/>
0335 <Parameter name="upar" value="2.4"/>
0336 <!--#. NBINS ETAMIN ETAMAX - Numb. of points and eta range used for field interals-->
0337 <Parameter name="upar" value="-2.78569"/>
0338 <Parameter name="upar" value="-2.9008"/>
0339 <Parameter name="upar" value="-2.96314"/>
0340 <Parameter name="upar" value="-2.96655"/>
0341 <Parameter name="upar" value="-2.94237"/>
0342 <Parameter name="upar" value="-2.85122"/>
0343 <Parameter name="upar" value="-2.7372"/>
0344 <Parameter name="upar" value="-2.61421"/>
0345 <Parameter name="upar" value="-2.16127"/>
0346 <Parameter name="upar" value="-2.14857"/>
0347 <Parameter name="upar" value="-1.93924"/>
0348 <Parameter name="upar" value="-1.71668"/>
0349 <Parameter name="upar" value="-1.53013"/>
0350 <Parameter name="upar" value="-1.35011"/>
0351 <Parameter name="upar" value="-1.17072"/>
0352 <Parameter name="upar" value="-1.00246"/>
0353 <!--#. BDLSQR - List of integral BdL^2 over eta range at AVGZPS-->
0354 <Parameter name="upar" value="-1740.76"/>
0355 <Parameter name="upar" value="-1509.19"/>
0356 <Parameter name="upar" value="-1251.72"/>
0357 <Parameter name="upar" value="-1041.02"/>
0358 <Parameter name="upar" value="-876.476"/>
0359 <Parameter name="upar" value="-696.679"/>
0360 <Parameter name="upar" value="-578.29"/>
0361 <Parameter name="upar" value="-471.048"/>
0362 <Parameter name="upar" value="-339.021"/>
0363 <Parameter name="upar" value="-301.782"/>
0364 <Parameter name="upar" value="-249.915"/>
0365 <Parameter name="upar" value="-200.744"/>
0366 <Parameter name="upar" value="-164.817"/>
0367 <Parameter name="upar" value="-133.732"/>
0368 <Parameter name="upar" value="-107.139"/>
0369 <Parameter name="upar" value="-85.6126"/>
0370 <!--#. AMSANG - List of average MS angles over eta range at AVGZPS-->
0371 <Parameter name="upar" value="0.0540097"/>
0372 <Parameter name="upar" value="0.0473109"/>
0373 <Parameter name="upar" value="0.0381081"/>
0374 <Parameter name="upar" value="0.0335356"/>
0375 <Parameter name="upar" value="0.0310799"/>
0376 <Parameter name="upar" value="0.0288958"/>
0377 <Parameter name="upar" value="0.0285559"/>
0378 <Parameter name="upar" value="0.0244343"/>
0379 <Parameter name="upar" value="0.0256078"/>
0380 <Parameter name="upar" value="0.0348454"/>
0381 <Parameter name="upar" value="0.0350174"/>
0382 <Parameter name="upar" value="0.0346059"/>
0383 <Parameter name="upar" value="0.0345555"/>
0384 <Parameter name="upar" value="0.0343852"/>
0385 <Parameter name="upar" value="0.0341075"/>
0386 <Parameter name="upar" value="0.0341807"/>
0387 <!--#. strip and wire shifts, electronics noise-->
0388 <Parameter name="upar" value="-0.25"/>
0389 <Parameter name="upar" value="0.25"/>
0390 <Parameter name="upar" value="-0.25"/>
0391 <Parameter name="upar" value="0.25"/>
0392 <Parameter name="upar" value="-0.25"/>
0393 <Parameter name="upar" value="0.25"/>
0394 <!--#. strip staggering-->
0395 <Parameter name="upar" value=".0"/>
0396 <Parameter name="upar" value=".0"/>
0397 <Parameter name="upar" value=".0"/>
0398 <Parameter name="upar" value=".0"/>
0399 <Parameter name="upar" value=".0"/>
0400 <Parameter name="upar" value=".0"/>
0401 <!--#. wires-->
0402 <Parameter name="upar" value="700"/>
0403 <Parameter name="upar" value="25"/>
0404 <!--#. (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0405 <Parameter name="upar" value="30"/>
0406 <!--#. Threshold for trigger-->
0407 <!-- NEW SpecPars for wire grouping. The idea (as per Tim Cox) is to
0408 use the concept of virtual wires. The main thing to note is that there
0409 are two vectors below which correspond to the number of groups that have
0410 that number of wires per group, and that 0 number of groups indicates no
0411 groups (i.e. dead space) and it covers 6 (for example) virtual wires.
0412
0413 Version to match old ORCA-internal wire geometry (ptc 25-Apr-05)
0414 -->
0415 <Parameter name="WireSpacing" value="3.16108*mm"/>
0416 <Parameter name="CenterPinToFirstWire" value="28.5*mm"/>
0417 <Parameter name="TotNumWireGroups" value="49"/>
0418 <Parameter name="NumGroups" value="48"/>
0419 <Parameter name="NumGroups" value="1"/>
0420 <Parameter name="NumWiresPerGrp" value="11"/>
0421 <Parameter name="NumWiresPerGrp" value="20"/>
0422 </SpecPar>
0423 <!--#. ========================================================-->
0424 <!--#. Parameters for Cathode Strip Chambers: ME13_ActiveGasVol-->
0425 <!--#. ========================================================-->
0426 <SpecPar name="MCFX4">
0427 <PartSelector path="//ME13_ActiveGasVol"/>
0428 <Parameter name="upar" value="0.03"/>
0429 <!--#. SGCSCY - strip resolution-->
0430 <Parameter name="upar" value="1.3741"/>
0431 <!--#. SGCSCZ - wire resolution-->
0432 <Parameter name="upar" value="1"/>
0433 <!--#. Efficiency-->
0434 <Parameter name="upar" value="10"/>
0435 <!--#. time window (bx)-->
0436 <Parameter name="upar" value="0.00"/>
0437 <!--#. neutron hit rate per CSC layer per event-->
0438 <Parameter name="upar" value="32"/>
0439 <!--#. NSTRIP - number of strips in one chamber-1/2-->
0440 <Parameter name="upar" value="2"/>
0441 <!--#. NNODES - number of strips 2*nnodes+1 around hit-->
0442 <Parameter name="upar" value="12"/>
0443 <!--#. Nowgrp - No. of wires in group-->
0444 <Parameter name="upar" value="0."/>
0445 <!--#. NOFLOA - No. of floating strips-->
0446 <Parameter name="upar" value="0.316108"/>
0447 <!--#. D_ANOD - Wire spacing-->
0448 <Parameter name="upar" value="0.47625"/>
0449 <!--#. D_ACAT "h" - Anode - Cathode spacing-->
0450 <Parameter name="upar" value="8.89"/>
0451 <!--#. GASGain - gas gain-->
0452 <Parameter name="upar" value="4000"/>
0453 <!--#. VOLTAGE - CSC Voltage-->
0454 <Parameter name="upar" value="0.00000E+00"/>
0455 <!--#. PHI_TILT - tilt angle for CSC wire slope (+z)-->
0456 <Parameter name="upar" value="0.01"/>
0457 <!--#. RMScal - calibration ambiguity-->
0458 <Parameter name="upar" value="0.5"/>
0459 <!--#. F_att - e- attraction in gas-->
0460 <Parameter name="upar" value="0.0779"/>
0461 <!--#. Fracqs - f_ind = 0.41 * f_sh = 0.19-->
0462 <Parameter name="upar" value="0.5"/>
0463 <!--#. ADCoun - ADC count (fC)-->
0464 <Parameter name="upar" value="0.0025"/>
0465 <!--#. RADWIR - Anode wire radius-->
0466 <Parameter name="upar" value="50"/>
0467 <!--#. TGSTIM - Fast shaper peaking time (ns)-->
0468 <Parameter name="upar" value="120"/>
0469 <!--#. TIMEPS - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0470 <Parameter name="upar" value="695.5"/>
0471 <!--#. AVGZPS - Average z-position for field integrals-->
0472 <Parameter name="upar" value="16"/>
0473 <Parameter name="upar" value="0.9"/>
0474 <Parameter name="upar" value="2.4"/>
0475 <!--#. NBINS ETAMIN ETAMAX - Numb. of points and eta range used for field interals-->
0476 <Parameter name="upar" value="-2.78569"/>
0477 <Parameter name="upar" value="-2.9008"/>
0478 <Parameter name="upar" value="-2.96314"/>
0479 <Parameter name="upar" value="-2.96655"/>
0480 <Parameter name="upar" value="-2.94237"/>
0481 <Parameter name="upar" value="-2.85122"/>
0482 <Parameter name="upar" value="-2.7372"/>
0483 <Parameter name="upar" value="-2.61421"/>
0484 <Parameter name="upar" value="-2.16127"/>
0485 <Parameter name="upar" value="-2.14857"/>
0486 <Parameter name="upar" value="-1.93924"/>
0487 <Parameter name="upar" value="-1.71668"/>
0488 <Parameter name="upar" value="-1.53013"/>
0489 <Parameter name="upar" value="-1.35011"/>
0490 <Parameter name="upar" value="-1.17072"/>
0491 <Parameter name="upar" value="-1.00246"/>
0492 <!--#. BDLSQR - List of integral BdL^2 over eta range at AVGZPS-->
0493 <Parameter name="upar" value="-1740.76"/>
0494 <Parameter name="upar" value="-1509.19"/>
0495 <Parameter name="upar" value="-1251.72"/>
0496 <Parameter name="upar" value="-1041.02"/>
0497 <Parameter name="upar" value="-876.476"/>
0498 <Parameter name="upar" value="-696.679"/>
0499 <Parameter name="upar" value="-578.29"/>
0500 <Parameter name="upar" value="-471.048"/>
0501 <Parameter name="upar" value="-339.021"/>
0502 <Parameter name="upar" value="-301.782"/>
0503 <Parameter name="upar" value="-249.915"/>
0504 <Parameter name="upar" value="-200.744"/>
0505 <Parameter name="upar" value="-164.817"/>
0506 <Parameter name="upar" value="-133.732"/>
0507 <Parameter name="upar" value="-107.139"/>
0508 <Parameter name="upar" value="-85.6126"/>
0509 <!--#. AMSANG - List of average MS angles over eta range at AVGZPS-->
0510 <Parameter name="upar" value="0.0540097"/>
0511 <Parameter name="upar" value="0.0473109"/>
0512 <Parameter name="upar" value="0.0381081"/>
0513 <Parameter name="upar" value="0.0335356"/>
0514 <Parameter name="upar" value="0.0310799"/>
0515 <Parameter name="upar" value="0.0288958"/>
0516 <Parameter name="upar" value="0.0285559"/>
0517 <Parameter name="upar" value="0.0244343"/>
0518 <Parameter name="upar" value="0.0256078"/>
0519 <Parameter name="upar" value="0.0348454"/>
0520 <Parameter name="upar" value="0.0350174"/>
0521 <Parameter name="upar" value="0.0346059"/>
0522 <Parameter name="upar" value="0.0345555"/>
0523 <Parameter name="upar" value="0.0343852"/>
0524 <Parameter name="upar" value="0.0341075"/>
0525 <Parameter name="upar" value="0.0341807"/>
0526 <!--#. strip and wire shifts, electronics noise-->
0527 <Parameter name="upar" value="-0.25"/>
0528 <Parameter name="upar" value="0.25"/>
0529 <Parameter name="upar" value="-0.25"/>
0530 <Parameter name="upar" value="0.25"/>
0531 <Parameter name="upar" value="-0.25"/>
0532 <Parameter name="upar" value="0.25"/>
0533 <!--#. strip staggering-->
0534 <Parameter name="upar" value=".0"/>
0535 <Parameter name="upar" value=".0"/>
0536 <Parameter name="upar" value=".0"/>
0537 <Parameter name="upar" value=".0"/>
0538 <Parameter name="upar" value=".0"/>
0539 <Parameter name="upar" value=".0"/>
0540 <!--#. wires-->
0541 <Parameter name="upar" value="700"/>
0542 <Parameter name="upar" value="25"/>
0543 <!--#. (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0544 <Parameter name="upar" value="22"/>
0545 <!--#. Threshold for trigger-->
0546 <!-- NEW SpecPars for wire grouping. The idea (as per Tim Cox) is to
0547 use the concept of virtual wires. The main thing to note is that there
0548 are two vectors below which correspond to the number of groups that have
0549 that number of wires per group, and that 0 number of groups indicates no
0550 groups (i.e. dead space) and it covers 6 (for example) virtual wires.
0551
0552 Version to match old ORCA-internal wire geometry (ptc 25-Apr-05)
0553 -->
0554 <Parameter name="WireSpacing" value="3.16108*mm"/>
0555 <Parameter name="CenterPinToFirstWire" value="28.5*mm"/>
0556 <Parameter name="TotNumWireGroups" value="43"/>
0557 <Parameter name="NumGroups" value="42"/>
0558 <Parameter name="NumGroups" value="1"/>
0559 <Parameter name="NumWiresPerGrp" value="12"/>
0560 <Parameter name="NumWiresPerGrp" value="15"/>
0561 </SpecPar>
0562 <!--#. ========================================================-->
0563 <!--#. Parameters for Cathode Strip Chambers: ME21_ActiveGasVol-->
0564 <!--#. ========================================================-->
0565 <SpecPar name="MCFX5">
0566 <PartSelector path="//ME21_ActiveGasVol"/>
0567 <Parameter name="upar" value="0.03"/>
0568 <!--#. SGCSCY - strip resolution-->
0569 <Parameter name="upar" value="0.9815"/>
0570 <!--#. SGCSCZ - wire resolution-->
0571 <Parameter name="upar" value="1"/>
0572 <!--#. Efficiency-->
0573 <Parameter name="upar" value="10"/>
0574 <!--#. time window (bx)-->
0575 <Parameter name="upar" value="0.00"/>
0576 <!--#. neutron hit rate per CSC layer per event-->
0577 <Parameter name="upar" value="40"/>
0578 <!--#. NSTRIP - number of strips in one chamber-1/2-->
0579 <Parameter name="upar" value="2"/>
0580 <!--#. NNODES - number of strips 2*nnodes+1 around hit-->
0581 <Parameter name="upar" value="5"/>
0582 <!--#. Nowgrp - No. of wires in group-->
0583 <Parameter name="upar" value="0."/>
0584 <!--#. NOFLOA - No. of floating strips-->
0585 <Parameter name="upar" value="0.316108"/>
0586 <!--#. D_ANOD - Wire spacing-->
0587 <Parameter name="upar" value="0.47625"/>
0588 <!--#. D_ACAT "h" - Anode - Cathode spacing-->
0589 <Parameter name="upar" value="1.0"/>
0590 <!--#. GASGain - gas gain-->
0591 <Parameter name="upar" value="4000"/>
0592 <!--#. VOLTAGE - CSC Voltage-->
0593 <Parameter name="upar" value="0.00000E+00"/>
0594 <!--#. PHI_TILT - tilt angle for CSC wire slope (+z)-->
0595 <Parameter name="upar" value="0.01"/>
0596 <!--#. RMScal - calibration ambiguity-->
0597 <Parameter name="upar" value="0.5"/>
0598 <!--#. F_att - e- attraction in gas-->
0599 <Parameter name="upar" value="0.0779"/>
0600 <!--#. Fracqs - f_ind = 0.41 * f_sh = 0.19-->
0601 <Parameter name="upar" value="0.5"/>
0602 <!--#. ADCoun - ADC count (fC)-->
0603 <Parameter name="upar" value="0.0025"/>
0604 <!--#. RADWIR - Anode wire radius-->
0605 <Parameter name="upar" value="50"/>
0606 <!--#. TGSTIM - Fast shaper peaking time (ns)-->
0607 <Parameter name="upar" value="120"/>
0608 <!--#. TIMEPS - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0609 <Parameter name="upar" value="818.5"/>
0610 <!--#. AVGZPS - Average z-position for field integrals-->
0611 <Parameter name="upar" value="16"/>
0612 <Parameter name="upar" value="0.9"/>
0613 <Parameter name="upar" value="2.4"/>
0614 <!--#. NBINS ETAMIN ETAMAX - Numb. of points and eta range used for field interals-->
0615 <Parameter name="upar" value="-2.59004"/>
0616 <Parameter name="upar" value="-2.65146"/>
0617 <Parameter name="upar" value="-2.62785"/>
0618 <Parameter name="upar" value="-2.54703"/>
0619 <Parameter name="upar" value="-2.51277"/>
0620 <Parameter name="upar" value="-2.39584"/>
0621 <Parameter name="upar" value="-2.26905"/>
0622 <Parameter name="upar" value="-2.16408"/>
0623 <Parameter name="upar" value="-2.02985"/>
0624 <Parameter name="upar" value="-1.86143"/>
0625 <Parameter name="upar" value="-1.70641"/>
0626 <Parameter name="upar" value="-1.53324"/>
0627 <Parameter name="upar" value="-1.39199"/>
0628 <Parameter name="upar" value="-1.25573"/>
0629 <Parameter name="upar" value="-1.11168"/>
0630 <Parameter name="upar" value="-0.98012"/>
0631 <!--#. BDLSQR - List of integral BdL^2 over eta range at AVGZPS-->
0632 <Parameter name="upar" value="-2022.75"/>
0633 <Parameter name="upar" value="-1797.73"/>
0634 <Parameter name="upar" value="-1511.72"/>
0635 <Parameter name="upar" value="-1256.85"/>
0636 <Parameter name="upar" value="-1075.22"/>
0637 <Parameter name="upar" value="-863.566"/>
0638 <Parameter name="upar" value="-716.777"/>
0639 <Parameter name="upar" value="-593.851"/>
0640 <Parameter name="upar" value="-484.521"/>
0641 <Parameter name="upar" value="-385.805"/>
0642 <Parameter name="upar" value="-318.684"/>
0643 <Parameter name="upar" value="-256.007"/>
0644 <Parameter name="upar" value="-209.594"/>
0645 <Parameter name="upar" value="-169.668"/>
0646 <Parameter name="upar" value="-135.47"/>
0647 <Parameter name="upar" value="-107.668"/>
0648 <!--#. AMSANG - List of average MS angles over eta range at AVGZPS-->
0649 <Parameter name="upar" value="0.0538518"/>
0650 <Parameter name="upar" value="0.0552904"/>
0651 <Parameter name="upar" value="0.0458346"/>
0652 <Parameter name="upar" value="0.0424406"/>
0653 <Parameter name="upar" value="0.0381868"/>
0654 <Parameter name="upar" value="0.0356256"/>
0655 <Parameter name="upar" value="0.0349435"/>
0656 <Parameter name="upar" value="0.0311002"/>
0657 <Parameter name="upar" value="0.0387601"/>
0658 <Parameter name="upar" value="0.0448225"/>
0659 <Parameter name="upar" value="0.0449265"/>
0660 <Parameter name="upar" value="0.0443748"/>
0661 <Parameter name="upar" value="0.0442617"/>
0662 <Parameter name="upar" value="0.0440366"/>
0663 <Parameter name="upar" value="0.0437193"/>
0664 <Parameter name="upar" value="0.0439283"/>
0665 <!--#. strip and wire shifts, electronics noise-->
0666 <Parameter name="upar" value="-0.25"/>
0667 <Parameter name="upar" value="0.25"/>
0668 <Parameter name="upar" value="-0.25"/>
0669 <Parameter name="upar" value="0.25"/>
0670 <Parameter name="upar" value="-0.25"/>
0671 <Parameter name="upar" value="0.25"/>
0672 <!--#. strip staggering-->
0673 <Parameter name="upar" value=".0"/>
0674 <Parameter name="upar" value=".0"/>
0675 <Parameter name="upar" value=".0"/>
0676 <Parameter name="upar" value=".0"/>
0677 <Parameter name="upar" value=".0"/>
0678 <Parameter name="upar" value=".0"/>
0679 <!--#. wires-->
0680 <Parameter name="upar" value="700"/>
0681 <Parameter name="upar" value="25"/>
0682 <!--#. (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0683 <Parameter name="upar" value="24"/>
0684 <!--#. Threshold for trigger-->
0685 <!-- NEW SpecPars for wire grouping. The idea (as per Tim Cox) is to
0686 use the concept of virtual wires. The main thing to note is that there
0687 are two vectors below which correspond to the number of groups that have
0688 that number of wires per group, and that 0 number of groups indicates no
0689 groups (i.e. dead space) and it covers 6 (for example) virtual wires.
0690
0691 Version to match old ORCA-internal wire geometry (ptc 25-Apr-05)
0692 -->
0693 <Parameter name="WireSpacing" value="3.16108*mm"/>
0694 <Parameter name="CenterPinToFirstWire" value="28.7*mm"/>
0695 <Parameter name="TotNumWireGroups" value="119"/>
0696 <Parameter name="NumGroups" value="118"/>
0697 <Parameter name="NumGroups" value="1"/>
0698 <Parameter name="NumWiresPerGrp" value="5"/>
0699 <Parameter name="NumWiresPerGrp" value="10"/>
0700 </SpecPar>
0701 <!--#. ========================================================-->
0702 <!--#. Parameters for Cathode Strip Chambers: ME31_ActiveGasVol-->
0703 <!--#. ========================================================-->
0704 <SpecPar name="MCFX6">
0705 <PartSelector path="//ME31_ActiveGasVol"/>
0706 <Parameter name="upar" value="0.03"/>
0707 <!--#. SGCSCY - strip resolution-->
0708 <Parameter name="upar" value="0.88335"/>
0709 <!--#. SGCSCZ - wire resolution-->
0710 <Parameter name="upar" value="1"/>
0711 <!--#. Efficiency-->
0712 <Parameter name="upar" value="10"/>
0713 <!--#. time window (bx)-->
0714 <Parameter name="upar" value="0.00"/>
0715 <!--#. neutron hit rate per CSC layer per event-->
0716 <Parameter name="upar" value="40"/>
0717 <!--#. NSTRIP - number of strips in one chamber-1/2-->
0718 <Parameter name="upar" value="2"/>
0719 <!--#. NNODES - number of strips 2*nnodes+1 around hit-->
0720 <Parameter name="upar" value="6"/>
0721 <!--#. Nowgrp - No. of wires in group-->
0722 <Parameter name="upar" value="0."/>
0723 <!--#. NOFLOA - No. of floating strips-->
0724 <Parameter name="upar" value="0.316108"/>
0725 <!--#. D_ANOD - Wire spacing-->
0726 <Parameter name="upar" value="0.476"/>
0727 <!--#. D_ACAT "h" - Anode - Cathode spacing-->
0728 <Parameter name="upar" value="1.0"/>
0729 <!--#. GASGain - gas gain-->
0730 <Parameter name="upar" value="4000"/>
0731 <!--#. VOLTAGE - CSC Voltage-->
0732 <Parameter name="upar" value="0.00000E+00"/>
0733 <!--#. PHI_TILT - tilt angle for CSC wire slope (+z)-->
0734 <Parameter name="upar" value="0.01"/>
0735 <!--#. RMScal - calibration ambiguity-->
0736 <Parameter name="upar" value="0.5"/>
0737 <!--#. F_att - e- attraction in gas-->
0738 <Parameter name="upar" value="0.0779"/>
0739 <!--#. Fracqs - f_ind = 0.41 * f_sh = 0.19-->
0740 <Parameter name="upar" value="0.5"/>
0741 <!--#. ADCoun - ADC count (fC)-->
0742 <Parameter name="upar" value="0.0025"/>
0743 <!--#. RADWIR - Anode wire radius-->
0744 <Parameter name="upar" value="50"/>
0745 <!--#. TGSTIM - Fast shaper peaking time (ns)-->
0746 <Parameter name="upar" value="120"/>
0747 <!--#. TIMEPS - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0748 <Parameter name="upar" value="944.5"/>
0749 <!--#. AVGZPS - Average z-position for field integrals-->
0750 <Parameter name="upar" value="16"/>
0751 <Parameter name="upar" value="0.9"/>
0752 <Parameter name="upar" value="2.4"/>
0753 <!--#. NBINS ETAMIN ETAMAX - Numb. of points and eta range used for field interals-->
0754 <Parameter name="upar" value="-2.61332"/>
0755 <Parameter name="upar" value="-2.58948"/>
0756 <Parameter name="upar" value="-2.51872"/>
0757 <Parameter name="upar" value="-2.40552"/>
0758 <Parameter name="upar" value="-2.30064"/>
0759 <Parameter name="upar" value="-2.14672"/>
0760 <Parameter name="upar" value="-1.99913"/>
0761 <Parameter name="upar" value="-1.85311"/>
0762 <Parameter name="upar" value="-1.71225"/>
0763 <Parameter name="upar" value="-1.55485"/>
0764 <Parameter name="upar" value="-1.41963"/>
0765 <Parameter name="upar" value="-1.27303"/>
0766 <Parameter name="upar" value="-1.16555"/>
0767 <Parameter name="upar" value="-1.0558"/>
0768 <Parameter name="upar" value="-0.938493"/>
0769 <Parameter name="upar" value="-0.827814"/>
0770 <!--#. BDLSQR - List of integral BdL^2 over eta range at AVGZPS-->
0771 <Parameter name="upar" value="-2391.68"/>
0772 <Parameter name="upar" value="-2078.31"/>
0773 <Parameter name="upar" value="-1753.93"/>
0774 <Parameter name="upar" value="-1476.56"/>
0775 <Parameter name="upar" value="-1253.14"/>
0776 <Parameter name="upar" value="-1017.81"/>
0777 <Parameter name="upar" value="-850.952"/>
0778 <Parameter name="upar" value="-700.091"/>
0779 <Parameter name="upar" value="-573.388"/>
0780 <Parameter name="upar" value="-458.916"/>
0781 <Parameter name="upar" value="-378.978"/>
0782 <Parameter name="upar" value="-304.874"/>
0783 <Parameter name="upar" value="-249.756"/>
0784 <Parameter name="upar" value="-202.508"/>
0785 <Parameter name="upar" value="-161.77"/>
0786 <Parameter name="upar" value="-128.514"/>
0787 <!--#. AMSANG - List of average MS angles over eta range at AVGZPS-->
0788 <Parameter name="upar" value="0.0550795"/>
0789 <Parameter name="upar" value="0.0552933"/>
0790 <Parameter name="upar" value="0.0534295"/>
0791 <Parameter name="upar" value="0.0501374"/>
0792 <Parameter name="upar" value="0.0452234"/>
0793 <Parameter name="upar" value="0.0426564"/>
0794 <Parameter name="upar" value="0.0420171"/>
0795 <Parameter name="upar" value="0.0376842"/>
0796 <Parameter name="upar" value="0.0454452"/>
0797 <Parameter name="upar" value="0.0512284"/>
0798 <Parameter name="upar" value="0.0512689"/>
0799 <Parameter name="upar" value="0.0507166"/>
0800 <Parameter name="upar" value="0.0505294"/>
0801 <Parameter name="upar" value="0.0502501"/>
0802 <Parameter name="upar" value="0.0499057"/>
0803 <Parameter name="upar" value="0.0500992"/>
0804 <!--#. strip and wire shifts, electronics noise-->
0805 <Parameter name="upar" value="-0.25"/>
0806 <Parameter name="upar" value="0.25"/>
0807 <Parameter name="upar" value="-0.25"/>
0808 <Parameter name="upar" value="0.25"/>
0809 <Parameter name="upar" value="-0.25"/>
0810 <Parameter name="upar" value="0.25"/>
0811 <!--#. strip staggering-->
0812 <Parameter name="upar" value=".0"/>
0813 <Parameter name="upar" value=".0"/>
0814 <Parameter name="upar" value=".0"/>
0815 <Parameter name="upar" value=".0"/>
0816 <Parameter name="upar" value=".0"/>
0817 <Parameter name="upar" value=".0"/>
0818 <!--#. wires-->
0819 <Parameter name="upar" value="700"/>
0820 <Parameter name="upar" value="25"/>
0821 <!--#. (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0822 <Parameter name="upar" value="24"/>
0823 <!--#. Threshold for trigger-->
0824 <!-- NEW SpecPars for wire grouping. The idea (as per Tim Cox) is to
0825 use the concept of virtual wires. The main thing to note is that there
0826 are two vectors below which correspond to the number of groups that have
0827 that number of wires per group, and that 0 number of groups indicates no
0828 groups (i.e. dead space) and it covers 6 (for example) virtual wires.
0829
0830 Version to match old ORCA-internal wire geometry (ptc 25-Apr-05)
0831 -->
0832 <Parameter name="WireSpacing" value="3.16108*mm"/>
0833 <Parameter name="CenterPinToFirstWire" value="28.4*mm"/>
0834 <Parameter name="TotNumWireGroups" value="89"/>
0835 <Parameter name="NumGroups" value="88"/>
0836 <Parameter name="NumGroups" value="1"/>
0837 <Parameter name="NumWiresPerGrp" value="6"/>
0838 <Parameter name="NumWiresPerGrp" value="9"/>
0839 </SpecPar>
0840 <!--#. ========================================================-->
0841 <!--#. Parameters for Cathode Strip Chambers: ME41_ActiveGasVol-->
0842 <!--#. ========================================================-->
0843 <SpecPar name="MCFX7">
0844 <PartSelector path="//ME41_ActiveGasVol"/>
0845 <Parameter name="upar" value="0.30000"/>
0846 <!--#. SGCSCY - strip resolution (if no MF4: set to 1m)-->
0847 <Parameter name="upar" value="0.88335"/>
0848 <!--#. SGCSCZ - wire resolution-->
0849 <Parameter name="upar" value="1"/>
0850 <!--#. Efficiency-->
0851 <Parameter name="upar" value="10"/>
0852 <!--#. time window (bx)-->
0853 <Parameter name="upar" value="0.00"/>
0854 <!--#. neutron hit rate per CSC layer per event-->
0855 <Parameter name="upar" value="40"/>
0856 <!--#. NSTRIP - number of strips in one chamber-1/2-->
0857 <Parameter name="upar" value="2"/>
0858 <!--#. NNODES - number of strips 2*nnodes+1 around hit-->
0859 <Parameter name="upar" value="5"/>
0860 <!--#. Nowgrp - No. of wires in group-->
0861 <Parameter name="upar" value="0."/>
0862 <!--#. NOFLOA - No. of floating strips-->
0863 <Parameter name="upar" value="0.316108"/>
0864 <!--#. D_ANOD - Wire spacing-->
0865 <Parameter name="upar" value="0.476"/>
0866 <!--#. D_ACAT "h" - Anode - Cathode spacing-->
0867 <Parameter name="upar" value="1.0"/>
0868 <!--#. GASGain - gas gain-->
0869 <Parameter name="upar" value="4000"/>
0870 <!--#. VOLTAGE - CSC Voltage-->
0871 <Parameter name="upar" value="0.00000E+00"/>
0872 <!--#. PHI_TILT - tilt angle for CSC wire slope (+z)-->
0873 <Parameter name="upar" value="0.01"/>
0874 <!--#. RMScal - calibration ambiguity-->
0875 <Parameter name="upar" value="0.5"/>
0876 <!--#. F_att - e- attraction in gas-->
0877 <Parameter name="upar" value="0.0779"/>
0878 <!--#. Fracqs - f_ind = 0.41 * f_sh = 0.19-->
0879 <Parameter name="upar" value="0.5"/>
0880 <!--#. ADCoun - ADC count (fC)-->
0881 <Parameter name="upar" value="0.0025"/>
0882 <!--#. RADWIR - Anode wire radius-->
0883 <Parameter name="upar" value="50"/>
0884 <!--#. TGSTIM - Fast shaper peaking time (ns)-->
0885 <Parameter name="upar" value="120"/>
0886 <!--#. TIMEPS - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
0887 <Parameter name="upar" value="1037.5"/>
0888 <!--#. AVGZPS - Average z-position for field integrals-->
0889 <Parameter name="upar" value="16"/>
0890 <Parameter name="upar" value="0.9"/>
0891 <Parameter name="upar" value="2.4"/>
0892 <!--#. NBINS ETAMIN ETAMAX - Numb. of points and eta range used for field interals-->
0893 <Parameter name="upar" value="-2.61227"/>
0894 <Parameter name="upar" value="-2.57615"/>
0895 <Parameter name="upar" value="-2.50111"/>
0896 <Parameter name="upar" value="-2.38167"/>
0897 <Parameter name="upar" value="-2.26575"/>
0898 <Parameter name="upar" value="-2.10386"/>
0899 <Parameter name="upar" value="-1.95273"/>
0900 <Parameter name="upar" value="-1.79966"/>
0901 <Parameter name="upar" value="-1.65421"/>
0902 <Parameter name="upar" value="-1.27766"/>
0903 <Parameter name="upar" value="-1.35574"/>
0904 <Parameter name="upar" value="-1.20803"/>
0905 <Parameter name="upar" value="-1.09916"/>
0906 <Parameter name="upar" value="-0.987618"/>
0907 <Parameter name="upar" value="-0.870221"/>
0908 <Parameter name="upar" value="-0.75727"/>
0909 <!--#. BDLSQR - List of integral BdL^2 over eta range at AVGZPS-->
0910 <Parameter name="upar" value="-2628.37"/>
0911 <Parameter name="upar" value="-2282.61"/>
0912 <Parameter name="upar" value="-1928.47"/>
0913 <Parameter name="upar" value="-1623.91"/>
0914 <Parameter name="upar" value="-1378.06"/>
0915 <Parameter name="upar" value="-1121.56"/>
0916 <Parameter name="upar" value="-937.187"/>
0917 <Parameter name="upar" value="-771.505"/>
0918 <Parameter name="upar" value="-632.52"/>
0919 <Parameter name="upar" value="-435.523"/>
0920 <Parameter name="upar" value="-418.465"/>
0921 <Parameter name="upar" value="-336.679"/>
0922 <Parameter name="upar" value="-275.93"/>
0923 <Parameter name="upar" value="-223.821"/>
0924 <Parameter name="upar" value="-178.785"/>
0925 <Parameter name="upar" value="-141.985"/>
0926 <!--#. AMSANG - List of average MS angles over eta range at AVGZPS-->
0927 <Parameter name="upar" value="0.0550795"/>
0928 <Parameter name="upar" value="0.0552933"/>
0929 <Parameter name="upar" value="0.0534295"/>
0930 <Parameter name="upar" value="0.0538758"/>
0931 <Parameter name="upar" value="0.0487599"/>
0932 <Parameter name="upar" value="0.0460991"/>
0933 <Parameter name="upar" value="0.0453844"/>
0934 <Parameter name="upar" value="0.0409912"/>
0935 <Parameter name="upar" value="0.0487037"/>
0936 <Parameter name="upar" value="0.0466129"/>
0937 <Parameter name="upar" value="0.0544567"/>
0938 <Parameter name="upar" value="0.0538838"/>
0939 <Parameter name="upar" value="0.0537295"/>
0940 <Parameter name="upar" value="0.053373"/>
0941 <Parameter name="upar" value="0.053015"/>
0942 <Parameter name="upar" value="0.053198"/>
0943 <!--#. strip and wire shifts, electronics noise-->
0944 <Parameter name="upar" value="-0.25"/>
0945 <Parameter name="upar" value="0.25"/>
0946 <Parameter name="upar" value="-0.25"/>
0947 <Parameter name="upar" value="0.25"/>
0948 <Parameter name="upar" value="-0.25"/>
0949 <Parameter name="upar" value="0.25"/>
0950 <!--#. strip staggering-->
0951 <Parameter name="upar" value=".0"/>
0952 <Parameter name="upar" value=".0"/>
0953 <Parameter name="upar" value=".0"/>
0954 <Parameter name="upar" value=".0"/>
0955 <Parameter name="upar" value=".0"/>
0956 <Parameter name="upar" value=".0"/>
0957 <!--#. wires-->
0958 <Parameter name="upar" value="700"/>
0959 <Parameter name="upar" value="25"/>
0960 <!--#. (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
0961 <Parameter name="upar" value="24"/>
0962 <!--#. Threshold for trigger-->
0963 <!-- NEW SpecPars for wire grouping. The idea (as per Tim Cox) is to
0964 use the concept of virtual wires. The main thing to note is that there
0965 are two vectors below which correspond to the number of groups that have
0966 that number of wires per group, and that 0 number of groups indicates no
0967 groups (i.e. dead space) and it covers 6 (for example) virtual wires.
0968
0969 Version to match old ORCA-internal wire geometry (ptc 25-Apr-05)
0970 -->
0971 <Parameter name="WireSpacing" value="3.16108*mm"/>
0972 <Parameter name="CenterPinToFirstWire" value="30.4*mm"/>
0973 <Parameter name="TotNumWireGroups" value="94"/>
0974 <Parameter name="NumGroups" value="93"/>
0975 <Parameter name="NumGroups" value="1"/>
0976 <Parameter name="NumWiresPerGrp" value="5"/>
0977 <Parameter name="NumWiresPerGrp" value="9"/>
0978 </SpecPar>
0979 <!--#. ========================================================-->
0980 <!--#. Parameters for Cathode Strip Chambers: ME22_ActiveGasVol-->
0981 <!--#. ========================================================-->
0982 <SpecPar name="MCFX8">
0983 <PartSelector path="//ME22_ActiveGasVol"/>
0984 <Parameter name="upar" value="0.03"/>
0985 <!--#. SGCSCY - strip resolution-->
0986 <Parameter name="upar" value="1.4722"/>
0987 <!--#. SGCSCZ - wire resolution-->
0988 <Parameter name="upar" value="1"/>
0989 <!--#. Efficiency-->
0990 <Parameter name="upar" value="10"/>
0991 <!--#. time window (bx)-->
0992 <Parameter name="upar" value="0.00"/>
0993 <!--#. neutron hit rate per CSC layer per event-->
0994 <Parameter name="upar" value="40"/>
0995 <!--#. NSTRIP - number of strips in one chamber-1/2-->
0996 <Parameter name="upar" value="2"/>
0997 <!--#. NNODES - number of strips 2*nnodes+1 around hit-->
0998 <Parameter name="upar" value="16"/>
0999 <!--#. Nowgrp - No. of wires in group-->
1000 <Parameter name="upar" value="0."/>
1001 <!--#. NOFLOA - No. of floating strips-->
1002 <Parameter name="upar" value="0.316108"/>
1003 <!--#. D_ANOD - Wire spacing-->
1004 <Parameter name="upar" value="0.47625"/>
1005 <!--#. D_ACAT "h" - Anode - Cathode spacing-->
1006 <Parameter name="upar" value="1.330"/>
1007 <!--#. GASGain - gas gain-->
1008 <Parameter name="upar" value="4000"/>
1009 <!--#. VOLTAGE - CSC Voltage-->
1010 <Parameter name="upar" value="0.00000E+00"/>
1011 <!--#. PHI_TILT - tilt angle for CSC wire slope (+z)-->
1012 <Parameter name="upar" value="0.01"/>
1013 <!--#. RMScal - calibration ambiguity-->
1014 <Parameter name="upar" value="0.5"/>
1015 <!--#. F_att - e- attraction in gas-->
1016 <Parameter name="upar" value="0.0779"/>
1017 <!--#. Fracqs - f_ind = 0.41 * f_sh = 0.19-->
1018 <Parameter name="upar" value="0.5"/>
1019 <!--#. ADCoun - ADC count (fC)-->
1020 <Parameter name="upar" value="0.0025"/>
1021 <!--#. RADWIR - Anode wire radius-->
1022 <Parameter name="upar" value="50"/>
1023 <!--#. TGSTIM - Fast shaper peaking time (ns)-->
1024 <Parameter name="upar" value="120"/>
1025 <!--#. TIMEPS - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
1026 <Parameter name="upar" value="818.5"/>
1027 <!--#. AVGZPS - Average z-position for field integrals-->
1028 <Parameter name="upar" value="16"/>
1029 <Parameter name="upar" value="0.9"/>
1030 <Parameter name="upar" value="2.4"/>
1031 <!--#. NBINS ETAMIN ETAMAX - Numb. of points and eta range used for field interals-->
1032 <Parameter name="upar" value="-2.59004"/>
1033 <Parameter name="upar" value="-2.65146"/>
1034 <Parameter name="upar" value="-2.62785"/>
1035 <Parameter name="upar" value="-2.54703"/>
1036 <Parameter name="upar" value="-2.51277"/>
1037 <Parameter name="upar" value="-2.39584"/>
1038 <Parameter name="upar" value="-2.26905"/>
1039 <Parameter name="upar" value="-2.16408"/>
1040 <Parameter name="upar" value="-2.02985"/>
1041 <Parameter name="upar" value="-1.86143"/>
1042 <Parameter name="upar" value="-1.70641"/>
1043 <Parameter name="upar" value="-1.53324"/>
1044 <Parameter name="upar" value="-1.39199"/>
1045 <Parameter name="upar" value="-1.25573"/>
1046 <Parameter name="upar" value="-1.11168"/>
1047 <Parameter name="upar" value="-0.98012"/>
1048 <!--#. BDLSQR - List of integral BdL^2 over eta range at AVGZPS-->
1049 <Parameter name="upar" value="-2022.75"/>
1050 <Parameter name="upar" value="-1797.73"/>
1051 <Parameter name="upar" value="-1511.72"/>
1052 <Parameter name="upar" value="-1256.85"/>
1053 <Parameter name="upar" value="-1075.22"/>
1054 <Parameter name="upar" value="-863.566"/>
1055 <Parameter name="upar" value="-716.777"/>
1056 <Parameter name="upar" value="-593.851"/>
1057 <Parameter name="upar" value="-484.521"/>
1058 <Parameter name="upar" value="-385.805"/>
1059 <Parameter name="upar" value="-318.684"/>
1060 <Parameter name="upar" value="-256.007"/>
1061 <Parameter name="upar" value="-209.594"/>
1062 <Parameter name="upar" value="-169.668"/>
1063 <Parameter name="upar" value="-135.47"/>
1064 <Parameter name="upar" value="-107.668"/>
1065 <!--#. AMSANG - List of average MS angles over eta range at AVGZPS-->
1066 <Parameter name="upar" value="0.0538518"/>
1067 <Parameter name="upar" value="0.0552904"/>
1068 <Parameter name="upar" value="0.0458346"/>
1069 <Parameter name="upar" value="0.0424406"/>
1070 <Parameter name="upar" value="0.0381868"/>
1071 <Parameter name="upar" value="0.0356256"/>
1072 <Parameter name="upar" value="0.0349435"/>
1073 <Parameter name="upar" value="0.0311002"/>
1074 <Parameter name="upar" value="0.0387601"/>
1075 <Parameter name="upar" value="0.0448225"/>
1076 <Parameter name="upar" value="0.0449265"/>
1077 <Parameter name="upar" value="0.0443748"/>
1078 <Parameter name="upar" value="0.0442617"/>
1079 <Parameter name="upar" value="0.0440366"/>
1080 <Parameter name="upar" value="0.0437193"/>
1081 <Parameter name="upar" value="0.0439283"/>
1082 <!--#. strip and wire shifts, electronics noise-->
1083 <Parameter name="upar" value="-0.25"/>
1084 <Parameter name="upar" value="0.25"/>
1085 <Parameter name="upar" value="-0.25"/>
1086 <Parameter name="upar" value="0.25"/>
1087 <Parameter name="upar" value="-0.25"/>
1088 <Parameter name="upar" value="0.25"/>
1089 <!--#. strip staggering-->
1090 <Parameter name="upar" value=".0"/>
1091 <Parameter name="upar" value=".0"/>
1092 <Parameter name="upar" value=".0"/>
1093 <Parameter name="upar" value=".0"/>
1094 <Parameter name="upar" value=".0"/>
1095 <Parameter name="upar" value=".0"/>
1096 <!--#. wires-->
1097 <Parameter name="upar" value="700"/>
1098 <Parameter name="upar" value="25"/>
1099 <!--#. (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
1100 <Parameter name="upar" value="38"/>
1101 <!--#. Threshold for trigger-->
1102 <!-- NEW SpecPars for wire grouping. The idea (as per Tim Cox) is to
1103 use the concept of virtual wires. The main thing to note is that there
1104 are two vectors below which correspond to the number of groups that have
1105 that number of wires per group, and that 0 number of groups indicates no
1106 groups (i.e. dead space) and it covers 6 (for example) virtual wires.
1107
1108 Version to match old ORCA-internal wire geometry (ptc 25-Apr-05)
1109 -->
1110 <Parameter name="WireSpacing" value="3.16108*mm"/>
1111 <Parameter name="CenterPinToFirstWire" value="28.7*mm"/>
1112 <Parameter name="TotNumWireGroups" value="63"/>
1113 <Parameter name="NumGroups" value="62"/>
1114 <Parameter name="NumGroups" value="1"/>
1115 <Parameter name="NumWiresPerGrp" value="16"/>
1116 <Parameter name="NumWiresPerGrp" value="30"/>
1117 </SpecPar>
1118 <!--#. ========================================================-->
1119 <!--#. Parameters for Cathode Strip Chambers: ME32_ActiveGasVol-->
1120 <!--#. ========================================================-->
1121 <SpecPar name="MCFX9">
1122 <PartSelector path="//ME32_ActiveGasVol"/>
1123 <Parameter name="upar" value="0.03"/>
1124 <!--#. SGCSCY - strip resolution-->
1125 <Parameter name="upar" value="1.4722"/>
1126 <!--#. SGCSCZ - wire resolution-->
1127 <Parameter name="upar" value="1"/>
1128 <!--#. Efficiency-->
1129 <Parameter name="upar" value="10"/>
1130 <!--#. time window (bx)-->
1131 <Parameter name="upar" value="0.00"/>
1132 <!--#. neutron hit rate per CSC layer per event-->
1133 <Parameter name="upar" value="40"/>
1134 <!--#. NSTRIP - number of strips in one chamber-1/2-->
1135 <Parameter name="upar" value="2"/>
1136 <!--#. NNODES - number of strips 2*nnodes+1 around hit-->
1137 <Parameter name="upar" value="16"/>
1138 <!--#. Nowgrp - No. of wires in group-->
1139 <Parameter name="upar" value="0."/>
1140 <!--#. NOFLOA - No. of floating strips-->
1141 <Parameter name="upar" value="0.316108"/>
1142 <!--#. D_ANOD - Wire spacing-->
1143 <Parameter name="upar" value="0.47625"/>
1144 <!--#. D_ACAT "h" - Anode - Cathode spacing-->
1145 <Parameter name="upar" value="1.33"/>
1146 <!--#. GASGain - gas gain-->
1147 <Parameter name="upar" value="4000"/>
1148 <!--#. VOLTAGE - CSC Voltage-->
1149 <Parameter name="upar" value="0.00000E+00"/>
1150 <!--#. PHI_TILT - tilt angle for CSC wire slope (+z)-->
1151 <Parameter name="upar" value="0.01"/>
1152 <!--#. RMScal - calibration ambiguity-->
1153 <Parameter name="upar" value="0.5"/>
1154 <!--#. F_att - e- attraction in gas-->
1155 <Parameter name="upar" value="0.0779"/>
1156 <!--#. Fracqs - f_ind = 0.41 * f_sh = 0.19-->
1157 <Parameter name="upar" value="0.5"/>
1158 <!--#. ADCoun - ADC count (fC)-->
1159 <Parameter name="upar" value="0.0025"/>
1160 <!--#. RADWIR - Anode wire radius-->
1161 <Parameter name="upar" value="50"/>
1162 <!--#. TGSTIM - Fast shaper peaking time (ns)-->
1163 <Parameter name="upar" value="120"/>
1164 <!--#. TIMEPS - Peaking Time of Amplifier & Shaped Chamber signal (ns)-->
1165 <Parameter name="upar" value="944.5"/>
1166 <!--#. AVGZPS - Average z-position for field integrals-->
1167 <Parameter name="upar" value="16"/>
1168 <Parameter name="upar" value="0.9"/>
1169 <Parameter name="upar" value="2.4"/>
1170 <!--#. NBINS ETAMIN ETAMAX - Numb. of points and eta range used for field interals-->
1171 <Parameter name="upar" value="-2.61332"/>
1172 <Parameter name="upar" value="-2.58948"/>
1173 <Parameter name="upar" value="-2.51872"/>
1174 <Parameter name="upar" value="-2.40552"/>
1175 <Parameter name="upar" value="-2.30064"/>
1176 <Parameter name="upar" value="-2.14672"/>
1177 <Parameter name="upar" value="-1.99913"/>
1178 <Parameter name="upar" value="-1.85311"/>
1179 <Parameter name="upar" value="-1.71225"/>
1180 <Parameter name="upar" value="-1.55485"/>
1181 <Parameter name="upar" value="-1.41963"/>
1182 <Parameter name="upar" value="-1.27303"/>
1183 <Parameter name="upar" value="-1.16555"/>
1184 <Parameter name="upar" value="-1.0558"/>
1185 <Parameter name="upar" value="-0.938493"/>
1186 <Parameter name="upar" value="-0.827814"/>
1187 <!--#. BDLSQR - List of integral BdL^2 over eta range at AVGZPS-->
1188 <Parameter name="upar" value="-2391.68"/>
1189 <Parameter name="upar" value="-2078.31"/>
1190 <Parameter name="upar" value="-1753.93"/>
1191 <Parameter name="upar" value="-1476.56"/>
1192 <Parameter name="upar" value="-1253.14"/>
1193 <Parameter name="upar" value="-1017.81"/>
1194 <Parameter name="upar" value="-850.952"/>
1195 <Parameter name="upar" value="-700.091"/>
1196 <Parameter name="upar" value="-573.388"/>
1197 <Parameter name="upar" value="-458.916"/>
1198 <Parameter name="upar" value="-378.978"/>
1199 <Parameter name="upar" value="-304.874"/>
1200 <Parameter name="upar" value="-249.756"/>
1201 <Parameter name="upar" value="-202.508"/>
1202 <Parameter name="upar" value="-161.77"/>
1203 <Parameter name="upar" value="-128.514"/>
1204 <!--#. AMSANG - List of average MS angles over eta range at AVGZPS-->
1205 <Parameter name="upar" value="0.0550795"/>
1206 <Parameter name="upar" value="0.0552933"/>
1207 <Parameter name="upar" value="0.0534295"/>
1208 <Parameter name="upar" value="0.0501374"/>
1209 <Parameter name="upar" value="0.0452234"/>
1210 <Parameter name="upar" value="0.0426564"/>
1211 <Parameter name="upar" value="0.0420171"/>
1212 <Parameter name="upar" value="0.0376842"/>
1213 <Parameter name="upar" value="0.0454452"/>
1214 <Parameter name="upar" value="0.0512284"/>
1215 <Parameter name="upar" value="0.0512689"/>
1216 <Parameter name="upar" value="0.0507166"/>
1217 <Parameter name="upar" value="0.0505294"/>
1218 <Parameter name="upar" value="0.0502501"/>
1219 <Parameter name="upar" value="0.0499057"/>
1220 <Parameter name="upar" value="0.0500992"/>
1221 <!--#. strip and wire shifts, electronic noise-->
1222 <Parameter name="upar" value="-0.25"/>
1223 <Parameter name="upar" value="0.25"/>
1224 <Parameter name="upar" value="-0.25"/>
1225 <Parameter name="upar" value="0.25"/>
1226 <Parameter name="upar" value="-0.25"/>
1227 <Parameter name="upar" value="0.25"/>
1228 <!--#. strip staggering-->
1229 <Parameter name="upar" value=".0"/>
1230 <Parameter name="upar" value=".0"/>
1231 <Parameter name="upar" value=".0"/>
1232 <Parameter name="upar" value=".0"/>
1233 <Parameter name="upar" value=".0"/>
1234 <Parameter name="upar" value=".0"/>
1235 <!--#. wires-->
1236 <Parameter name="upar" value="700"/>
1237 <Parameter name="upar" value="25"/>
1238 <!--#. (700e + 25 e/pF * 75 pF/m)/sqrt (time/100 [ns])(T.Y.)-->
1239 <Parameter name="upar" value="38"/>
1240 <!--#. Threshold for trigger-->
1241 <!-- NEW SpecPars for wire grouping. The idea (as per Tim Cox) is to
1242 use the concept of virtual wires. The main thing to note is that there
1243 are two vectors below which correspond to the number of groups that have
1244 that number of wires per group, and that 0 number of groups indicates no
1245 groups (i.e. dead space) and it covers 6 (for example) virtual wires.
1246
1247 Version to match old ORCA-internal wire geometry (ptc 25-Apr-05)
1248 -->
1249 <Parameter name="WireSpacing" value="3.16108*mm"/>
1250 <Parameter name="CenterPinToFirstWire" value="28.7*mm"/>
1251 <Parameter name="TotNumWireGroups" value="63"/>
1252 <Parameter name="NumGroups" value="62"/>
1253 <Parameter name="NumGroups" value="1"/>
1254 <Parameter name="NumWiresPerGrp" value="16"/>
1255 <Parameter name="NumWiresPerGrp" value="30"/>
1256 </SpecPar>
1257 </SpecParSection>
